644896
8
Zoom out
Zoom in
Previous page
1/12
Next page
POWX0070LI EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
8.2 Inserting and removing the battery (Fig 2)
WARNING: Before making any adjustments ensure the drill is switched off
with the direction of rotation selector in the centre position
Remove the battery pressing the battery latches and at the same time pull the battery
pack off.
To insert the battery, push the battery pack onto the contacts of the tool.
8.3 Installing and Removing a Bit and a Drill (Fig 3)
This drill has a keyless chuck to prevent the bit or drill from loosening.
Hold ring A of the drill chuck tight with one hand.
Turn upper ring B anticlockwise with the other hand until the drill chuck opening is large
enough to accept the tool.
Insert the drill or the screwdriver bit into the drill chuck.
Turn ring B clockwise until the tool is clamped tightly.
Remove the tool in the opposite way.
8.4 Switch (4)
The drill is started and stopped by depressing and releasing the ON/OFF switch trigger.
8.4.1 Switch lock (Fig 4)
The switch trigger can be locked in the center position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the center position.
8.4.2 Direction of rotation (Fig 5)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
8.4.2.1 Clockwise rotation:
To select forward rotation, release the on/off switch and push the forward/reverse lever to right
side of the tool.
8.4.2.2 Anticlockwise rotation:
To select reverse rotation, push the lever to left side of the tool. When the selector is in center
position, the switch trigger is locked and the machine cannot be switched on.
8.4.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
8.5 Adjusting the torque
The torque is adjusted by rotating the torque setting ring; the torque is greater when the torque
setting is set on a higher position. The torque is less when the torque setting ring is set on a
low position1denote lowest and “ denote highest.
Torque is set by means of a torque setting according to different screw and different material,
you can adjust suitable torque, if the screw is long and material is hard, you can adjust the
bigger setting.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0070LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0070LI in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0070LI

Powerplus POWX0070LI User Manual - German - 13 pages

Powerplus POWX0070LI User Manual - Dutch - 13 pages

Powerplus POWX0070LI User Manual - French - 13 pages

Powerplus POWX0070LI Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info