644889
12
Zoom out
Zoom in
Previous page
1/14
Next page
POWX0057 EN
Copyright © 2016 VARO P a g e | 12 www.varo.com
7.10.1 Drilling in wood
For maximum performance, use high speed steel (HSS° drills for wood drilling, turn the torque
setting on the drill position“ ”. Begin drilling at a very low speed to prevent the bit from
slipping off the starting point. Increase the speed as the drill bit bites into the material. When
drilling through holes, place a block of wood behind the work piece to prevent ragged or edges
on the back side of the hole.
7.10.2 drilling in metal
For maximum performance, use high speed steel (HSS) drill bits for metal or steel drilling.
Turn the torque setting on the drill position“ ”. Begin drilling at a very low speed to prevent
the bit from slipping off the starting point. Maintain a speed and pressure which allows cutting
without overheating the bit. Applying too much pressure will overheat the drill, wear the
bearings, bend or burn bits, produce off-center or irregular shaped holes.
When drilling large holes in metal, it is recommended that you drill with a small bit at first, then
finish with a large bit, also lubricate the bit with oil to improve drilling action and increase bit life.
8 CLEANING AND MAINTENANCE
Attention! Always remove the battery before cleaning.
Remove dust and dirt with a cloth slightly dampened with detergent solution. In doing so,
ensure that no water gets into the machine.
Clean drillings and dust out of the chuck regularly.
The cordless drill is permanently lubricated and does not require oiling.
9 TECHNICAL DETAILS
Model nr.
POWX0057
No-load speed
0-400 / 0-1100 min-1
Drill chuck capacity:
0.8 - 10mm
Torque setting:
20+1 positions
Left /right (clockwise/ counter-clockwise rotation)
yes
Battery
NI-CD
Voltage
18V
capacity
1200 mAh
charger
ERP
Charge time
3-5h
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
67 dB(A)
Acoustic power level LwA
78 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
2.6 m/s²
K = 1,5 m/s²
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0057 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0057 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0057

Powerplus POWX0057 User Manual - German - 14 pages

Powerplus POWX0057 User Manual - Dutch - 14 pages

Powerplus POWX0057 User Manual - French - 14 pages

Powerplus POWX0057 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info