795560

Powerplus POWPB30400 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
POWPB30400 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
8.2 Removal / insertion of battery (Fig. 2)
WARNING: Before making any adjustments ensure the machine is switched
off or remove the battery pack.
▪ Hold the tool with one hand and the battery pack (9) with the other.
▪ To install: push and slide battery pack into battery port, make sure the release latch on the
rear side of the battery snaps into place and battery is secure before beginning operation.
▪ To remove: Press the battery release latch and pull the battery pack out at the same time.
8.3 Battery capacity indicator (Fig. 3)
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you squeeze the button (11). Before using the machine, please press switch
trigger to check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
3 LED’s are litt: Battery fully charged
2 LED’s are litt: Battery 60% charged
1 LED is litt: Battery almost discharged
9 ASSEMBLY
9.1 Install or remove the saw blade (Fig 4)
WARNING: Before making any adjustments ensure the saw is switched off
with the lock-off button in the centre position and remove the battery from
the saw.
To avoid accidental start, check to make sure lock-off button is not engaged
prior to plugging in tool and you finger is not touching the on/off switch
trigger.
▪ Rotate the Quick-release blade clamp (2) anticlockwise with hand.
▪ At the same time push blade (7) to the deepest position, then release the quick-release
blade clamp (2). Make sure it is securely fastened.
▪ When removing the saw blade (7), follow the above procedure in reverse order.
WARNING! Before plugging in battery pack, always pull on the blade to
make sure it is securely locked in the clamp. Failure to do so may result in
serious injury.
10 OPERATION
10.1 Switch on/off (Fig. 5)
▪ Make sure the battery pack is installed.
▪ Push the lock-off button (4) towards left or right and squeeze the ON/OFF switch trigger
(5).
▪ To switch off simply release the ON/OFF switch trigger (5).
10.2 To change angle of the pivot shoe assembly (Fig. 6)
The pivot shoe assembly can be adjusted in a suitable angle by hand which is convenient for
operating this tool.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWPB30400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWPB30400 in the language / languages: English as an attachment in your email.

The manual is 0.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWPB30400

Powerplus POWPB30400 User Manual - German - 13 pages

Powerplus POWPB30400 User Manual - Dutch - 13 pages

Powerplus POWPB30400 User Manual - French - 13 pages

Powerplus POWPB30400 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info