675214
5
Zoom out
Zoom in
Previous page
1/9
Next page
POWP6050 EN
Copyright © 2018 VARO P a g e | 5 www.varo.com
After changing the bit or making any adjustments, make sure the collet nut and any other
adjustment devices are securely tightened. Loose adjustment device can unexpectedly
shift, causing loss of control; loss-rotating components will be violently thrown.
Never start the tool when the bit is engaged in the material. The bit cutting edge may grab
the material causing loss of control of the cutter.
Always hold the tool with two hands during start-up. The reaction torque of the motor can
cause the tool to twist.
The direction of feeding the bit into the material is very important and it relates to the
direction of bit rotation. When viewing the tool form the top, the bit rotates clockwise. Feed
direction of cutting must be counter-clockwise (Fig 12). NOTE: inside and outside cuts will
require different feed direction; refer to section on feeding the router. Feeding the tool in
the wrong direction causes the cutting edge of the bit to climb out of the work and pull the
tool in the direction of this feed.
Never use dull or damaged bits. Sharp bits must be handled with care. Damaged bits can
snap during use. Dull bits require more force to push the tool, possibly causing the bit to
break.
Never touch the bit during or immediately after the use. After use the bit is too hot to be
touched by bare hands.
Never lay the tool down until the motor has come to a complete standstill. The spinning bit
can grab the surface and pull the tool out of your control.
Never use bits that have a cutting diameter greater than the opening in the base.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead form lead-based paints,
Crystalline silica form bricks and cement and other masonry products, and
Arsenic and chromium form chemically treated lumber.
Your risk form these exposures vary, depending on how often you do this type of work. To
reduce you exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
7 ASSEMBLY
7.1 Inserting and removing a cutter (Fig. 1)
7.1.1 Inserting a cutter
Press and hold down the spindle lock button (5).
Using the wrench to loosen the collet nut (6) a few turns, insert a collet and a cutter into
order.
Tighten the collet nut and release the spindle lock button.
7.1.2 Removing a cutter
Press and hold down the spindle lock button (5) and loosen the collet nut (6) completely.
Remove the cutter.
Fit a new suitable accessory and tighten the collet nut.
Note: Never tighten the collet nut without a cutter in the collet.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWP6050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWP6050 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWP6050

Powerplus POWP6050 User Manual - German - 11 pages

Powerplus POWP6050 User Manual - Dutch - 10 pages

Powerplus POWP6050 User Manual - French - 10 pages

Powerplus POWP6050 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info