Manual Powerplus POWLI261 - LED FLOODLIGHT (page 2 of 4) (English)

640918

Zoom out

Zoom in

1/4

POWLI261 EN

4.2 Wiring diagram

 For mounting use a connection supply cable with N = blue, earth = green/yellow and

L = brown and connect as shown in fig 3. Srew the barrel nut of the srew cap so that

the packing tightens. The packing can be adjusted to a cable diameter of 8-11mm.

 If you want continuous light you can add a switch. Please consult fig 4

4.3 Mounting

 Check the correct way of mounting in fig 1.

 Check the safety distance between the body and inflammable surface when wall or

corner mounted in fig. 2.

5 USING THE FLOODLIGHT

 Turn the power back on.

6 SETTING THE LIGHT SYSTEM (FIG. 5)

6.1 Test mode

 Turn the LITE control and the Time control anticlockwise to the edge (the TEST

position).

 Set the SENS. Control to its mid-point.

 Turn on the wall switch. The floodlight will turn on for about 1 minute to warm up.

Then it turns off.

 Walk through the detection area. The floodlight turns on when you move and turns off

when you stop. Wait for the floodlight to turn off before moving again to test the

sensor.

 Adjust the motion sensor to cover the desired detection area.

 For a smaller coverage area, point the sensor down; for a larger coverage area, point

the sensor up.

6.2 TIME adjustment

 The TIME adjustment controls how long the floodlight will stay on after the motion

has been detected.

 Turn the TIME control knob clockwise to increase (up to about 12 minutes) how long

the floodlights stay on or anti-clockwise to decrease (down to about 5 seconds) the

time delay.

6.3 LITE adjustment

 The LITE adjustment determines at what light level the lighting system will start

operating when you set the sensor to Automatic Operation.

 Provisionally turn the LITE control knob to the edge clockwise at the moon (dusk)

position. In this provisional setting mode, the motion sensor remains inactive during

daylight. At dusk when you find it is the LUX level desired for operation, simply set

the LITE control knob to the position that the motion sensor will become active as

daylight declines.

6.4 SENS. adjustment

The sensitivity adjustment may be adjusted to compensate for seasonal variations in

temperature and to reduce unwanted triggering. The optimum sensitivity can be achieved

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWLI261 - LED FLOODLIGHT in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWLI261 - LED FLOODLIGHT

Powerplus POWLI261 - LED FLOODLIGHT User Manual - German - 4 pages

Powerplus POWLI261 - LED FLOODLIGHT User Manual - Dutch - 4 pages

Powerplus POWLI261 - LED FLOODLIGHT User Manual - French - 4 pages

Powerplus POWLI261 - LED FLOODLIGHT Additional guide - All languages - 3 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWLI261 - LED FLOODLIGHT Manual

Product: