Manual Powerplus POWLI021 - HALOGEN FLOODLIGHT (page 3 of 4) (English)

640893

Zoom out

Zoom in

1/4

POWLI021 EN

 Turn the TIME control knob clockwise to increase (up to about 12 minutes) how long

the floodlights stay on or anti-clockwise to decrease (down to about 5 seconds) the

time delay.

7.3 LITE adjustment

 The LITE adjustment determines at what light level the lighting system will start

operating when you set the sensor to Automatic Operation.

 Provisionally turn the LITE control knob to the edge clockwise at the moon (dusk)

position. In this provisional setting mode, the motion sensor remains inactive during

daylight. At dusk when you find it is the LUX level desired for operation, simply set

the LITE control knob to the position that the motion sensor will become active as

daylight declines.

7.4 SENS. adjustment

The sensitivity adjustment may be adjusted to compensate for seasonal variations in

temperature and to reduce unwanted triggering. The optimum sensitivity can be achieved

by setting the SENS. control knob initially to its mid-point and then adjusting the control

knob clockwise to increase (up to 12 meters) the detecting distance or anti-clockwise to

decrease (down to 3 meters) the detecting distance.

8 THE FIELD OF DETECTION

 The field of detection of the infrared lamp can be adjusted 30degree in horizontal

direction and 30 degree in vertical direction. By means of horizontal adjustment, the

permanent 180°field of detection can be infinitely directed to the right or left

(Fig.4).By means of vertical adjustment the detection range can be reduced or

expanded (Fig.5).This way any false detections caused by movements from

neighbours and from the street are excluded.

 The best detection is obtained by approaching the field of detection perpendicular to

its axis (Fig.6).

 If the field of detection is approaching the direction of its axis, the infrared detector

will, in some cases, respond later (Fig.7)

9 FIXING AND CHANGING A HALOGEN TUBE

 Lamp tube fitting. Unscrew the bolt and open the glass holder. Fit the tube into the

tube socket. Assure that the two ends of the tube contact the socket pole correctly.

 Then place the waterproof rubber pad in it’s original position and close the cover with

the bolt.

10 POSSIBLE PROBLEMS

 Ventilators, such as the discharge from a vapour cap or dryer (hot air movement) can

cause the lamp to switch on when it is not required to do so.

 Passing cars (warm engines) can also cause your lamp to switch on.

 Nearby trees and bushes, sudden changes in temperature and gusts of wind can

also cause the lamp to switch on.

 If the lamp has been placed under a roof or under trees, then the lamp can also burn

during daylight hours.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWLI021 - HALOGEN FLOODLIGHT in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWLI021 - HALOGEN FLOODLIGHT

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - German - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - Dutch - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - French - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT Additional guide - All languages - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWLI021 - HALOGEN FLOODLIGHT Manual

Product: