667554
6
Zoom out
Zoom in
Previous page
1/9
Next page
POWEG9010 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
8.2 Switching ON/OFF
Press the On/Off switch(9) to start machine.
To stop the machine simply let go of the On / Off switch(9).
8.3 Use/Operation
The easiest way to use the blower vac is to place the shoulder strap in a comfortable
position over your shoulder and hold the rear handle at hip height so that the majority of
the tool’s weight rests on the rollers.
When using the blower vac to pick up leaves it is best to move the tool on its rollers. This
ensures that the blower vac is at the perfect height above the ground. The blower vac is
designed only to pick up leaves. To avoid l damage to the tool that is not covered by the
warranty, do not use it to pick up branches, stones or other hard materials.
When using the tool as a leaf blower always work away from solid objects such as walls,
fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The
tool will be more effective if you keep it at a certain distance away from the leaves and
blow the leaves forwards.
8.4 Switching operating mode (Fig 4)
To switch the tool from blower mode to vacuum mode, simply switch it off at the main
switch and move the function selector lever to the other position.
Up vac /Down blow
8.5 Leaf bag
Note: Before you remove and empty the leaf bag ensure that the tool has
been disconnected from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip
fastener again
When the leaf bag is open you can also check the function of the blower vac’s slide control.
If there is a blockage in the tool, check this function and remove the blockage.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Regularly clean the tool housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
9.2 Replacing carbon brushes
Remove and check the carbon brushes regularly. Replace when they have worn down to the
limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon
brushes must be replaced at the same time. Only use original carbon brushes.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWEG9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWEG9010 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWEG9010

Powerplus POWEG9010 User Manual - German - 9 pages

Powerplus POWEG9010 User Manual - Dutch - 9 pages

Powerplus POWEG9010 User Manual - French - 9 pages

Powerplus POWEG9010 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info