714923
6
Zoom out
Zoom in
Previous page
1/20
Next page
POWEG2010 EN
Copyright © 2019 VARO P a g e | 6 www.varo.com
PINCHING the saw chain along the TOP of the guide bar may PUSH the guide bar rapidly
back toward the operator.
Any of these reactions may cause you to lose control of the saw, which could result in serious
personal injury.
With a basic understanding of kickback, you can reduce or eliminate the element of
surprise. Sudden surprise contributes to accidents.
Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and
the left hand on the front handle, when the engine is running. Use a firm grip with thumbs
and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and
maintain control of the saw. Don’t let go.
Make sure that the area in which you are cutting is free from obstructions. Do not let the
nose of the guide bar contact a log, branch, or any other obstruction which could be hit
while you are operating the saw.
Cut at high engine speeds.
Do not overreach or cut above shoulder height.
Follow manufacturer’s sharpening and maintenance instructions for the saw chain.
Only use replacement bars and chains specified by the manufacturer or the equivalent.
NOTE: Low-kickback saw chain is a chain that has met the kickback
performance.
WARNING: Kickback can lead to dangerous loss of control of the chain saw
and result in serious or fatal injury to the saw operator or to anyone
standing close by. Always be alert. Rotational kickback and pinch-kickback
are major chain saw operational dangers and the leading cause of most
accidents.
Beware of:
Rotational kickback (Fig 1)
A = kickback path
B = kickback reaction zone
The push (pinch kickback) and pull reactions (Fig 2)
A = pull
B = solid objects
C = push
7 ASSEMBLY
Note: described actions below may vary slightly depending on model you
purchased.
7.1 Tools for assembly
You will need these tools to assemble your chain saw:
Combination wrench-screwdriver (contained in your user’s kit).
Heavy duty work gloves (user supplied).
7.2 Assembly requirements
Warning: do not start saw engine until unit is properly prepared.
Your new chain saw will require adjustment of chain, filling the fuel tank with correct fuel
mixture and filling the oil tank with chain lubricating oil before the unit is ready for operation.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWEG2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWEG2010 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWEG2010

Powerplus POWEG2010 User Manual - German - 23 pages

Powerplus POWEG2010 User Manual - Dutch - 22 pages

Powerplus POWEG2010 User Manual - French - 22 pages

Powerplus POWEG2010 User Manual - Italian - 22 pages

Powerplus POWEG2010 User Manual - Spanish - 23 pages

Powerplus POWEG2010 Additional guide - All languages - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info