795807
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWEBG7520 EN
Copyright © 2018 VARO P a g e | 7 www.varo.com
Flickering red + solid green: charging
Solid green + solid red: charged
Note: if the battery does not fit properly, disconnect it and confirm that the
battery pack is the correct model for this charger as shown on the
specification chart. Do not charge any other battery pack or any battery
pack that does not securely fit the charger.
1. Frequently monitor the charger and battery pack while connected
2. Unplug the charger and disconnect it from the battery pack when finished.
3. Allow the battery pack to cool completely before using it.
4. Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool
down to room temperature before charging. This will extend the life of your
batteries.
8.2 Removal / insertion of battery (Fig. 2)
WARNING: Before making any adjustments ensure the hedge trimmer is
switched off or remove the battery pack.
Hold the tool with one hand and the battery pack (6) with the other.
To install: push and slide battery pack into battery port, make sure the release latch on the
rear side of the battery snaps into place and battery is secure before beginning operation.
To remove: Press the battery release latch and pull the battery pack out at the same time.
9 ASSEMBLY
WARNING: Switch off and remove battery from machine before adjusting or
cleaning!
9.1 Installing the blower tube(Fig. 3)
To install the long blower tube (8), push it onto the blow outlet (7) until you hear a ‘click’.
9.2 Removing the blower tube (Fig. 4)
Depress and hold the lock button (1), and pull the blower tube (8) outwards and remove it,
10 OPERATION
10.1 ON/OFF switch button (Fig. 5)
The tool will continue to blow for a few seconds after being switched off. Allow the motor to
stop rotating before switching on again. Do not rapidly switch off and on.
Connect the battery pack to the cordless blower and ensure it firmly.
To switch on the cordless blower, press the lock-off button (2) and squeeze the ON/OFF
switch trigger (3).
When you release the switch trigger (3), the tool turns off.
WARNING: Before inserting the battery pack in the tool, always check to
see that the ON/OFF trigger switch actuates properly and returns to the
OFF position when released. This can cause switch breakage. Operating
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWEBLBS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWEBLBS2 in the language / languages: English as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWEBLBS2

Powerplus POWEBLBS2 User Manual - German - 11 pages

Powerplus POWEBLBS2 User Manual - German - 11 pages

Powerplus POWEBLBS2 User Manual - French - 11 pages

Powerplus POWEBLBS2 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info