POWEB1520 EN
Copyright © 2018 VARO P a g e | 11 www.varo.com
10.5 Hammer Setting
▪ For maximum performance, use a good quality masonry bit for hammer drill, turn the
torque adjustment ring on the impact mode position“ ”.
▪ Only use this setting to bore or drill into an object. The Hammer setting works well when
drilling/chipping into materials. It is generally used to bore holes with the purpose of
breaking up materials.
▪ The tip of tool MUST be firmly depressed for the hammer action to engage.
NOTE: Only use a masonry bit when drilling into masonry materials.
11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Maintenance
▪ Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
12 TECHNICAL DETAILS
