795769
6
Zoom out
Zoom in
Previous page
1/9
Next page
POWE80041 EN
Copyright © 2021 VARO P a g e | 6 www.varo.com
9 OPERATION
Always observe the safety instructions and applicable regulations.
Use only one hand to hold the tool Do not place your other hand over the
air vents
The machine must be switched off when it is connected to the mains.
Prior to operation:
Set the desired air temperature.
9.1 Switching on and off
Connect the plug to the power supply. The power-on indicator is illumed until the tool
disconnect from the power mains.
To turn on the hot air gun, set its power switch (1) to “I or “ll.
o Switch “I - Low temperature position (350°C maximum). Used for mild
heating applications, i.e., heat shrink tube, heat shrink bag, plastic
bending, shaping and welding, removing old paint coating.
o Switch “ll” - High temperature position (600°C maximum). Used for
intense heating applications, i.e., frozen water pipe, defrosting
refrigerator, and metal welding.
To turn off the hot air gun, set its power switch (1) to “l. Then set the power switch to “0
and unplug the tool from its electrical outlet. (This method helps cool down the heat
element properly to extend the life of the hot air gun.)
9.2 Stripping paint
Set a high air temperature.
Switch the tool on.
Direct the hot air onto the paint to be removed.
When the paint softens, scrape the paint away using a hand scraper.
Do not strip metal window frames, as the heat may be conducted onto the
glass and crack it. When stripping other window frames, use the glass
protection nozzle.
Do not keep the tool directed on one spot too long to prevent igniting the surface.
Avoid collecting paint on the scraper accessory, as it may ignite. If necessary, carefully
remove paint debris from the scraper accessory using a knife.
9.3 Stationary use
This tool can also be used in stationary mode.
Place the tool onto the workbench.
Secure the cable to prevent pulling the tool off the workbench.
Carefully switch the tool on.
Make sure that the nozzle always points away from you and any
bystanders.
Make sure not to drop anything into the nozzle.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE80041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE80041 in the language / languages: English as an attachment in your email.

The manual is 0.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE80041

Powerplus POWE80041 User Manual - German - 9 pages

Powerplus POWE80041 User Manual - Dutch - 9 pages

Powerplus POWE80041 User Manual - French - 9 pages

Powerplus POWE80041 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info