POWE80015 EN
Copyright © 2022 VARO P a g e | 6 www.varo.com
NOTE: It is suggested that you have a piece of scrap material supporting
the blade when making a flush cut. If you need to rest the blade on a
delicate surface, you need to use cardboard or masking tape to protect the
surface.
Use the segmented saw blade for making continuous precise cuts in wood, plaster or drywall
material. Applications include cutting openings for electrical boxes, repairing flooring, cutting
flooring for venting, and more.
8.4 Sanding
With sanding accessories, this tool is a detail sander. It is suitable for dry sanding of wood,
plastic, and metal surfaces, especially in corners, edges and hard to reach areas.
Tips:
▪ Work with the complete surface of the sandpaper, not only with the tip.
▪ Sand with continuous motion and light pressure. Do not apply excessive pressure. Let the
tool do the work.
▪ Always secure small work pieces.
▪ Select suitable abrasive paper for best results.
8.5 Scrapping
Scraper blades are suitable for removing vinyl, varnish, paint layers, carpeting, caulk and other
adhesives.
Use a rigid scraper blade to remove harder materials, such as vinyl flooring, carpeting and tile
adhesives in a large area.
Use a flexible scraper blade (not included) to remove softer material such as caulk.
Tips:
▪ When removing strong, tacky adhesive, grease the scraper blade surface to reduce
gumming up.
▪ Begin with light pressure. The oscillating motion of accessory only occurs when pressure
is applied to the material to be removed.
▪ If you are removing caulk from a delicate surface, such as a bath tub or tile back splash,
we recommend taping to protect the surface that the blade will rest on.
9 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
