676333
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWE40030 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
Turn and loosen the adjustment knob (7) with clockwise direction.
Place the auxiliary handle in the desired position and tighten the adjustment knob firmly.
7.2 Switch action (Fig. 2)
Connect the plug to the power supply, the power-on indicator is illumed until the tool
disconnect from the power mains.
Switch the power tool on: push the ON/OFF switch button (2) forwards into the “I” position.
Switch the power tool off: push the ON/OFF switch button backwards to the “O” position.
7.3 Speed adjusting dial (Fig. 3)
This tool has a speed control dial (1) at the front.
The speed can be adjusted between 6000 rpm and 13000 rpm.
Higher speed is obtained when the speed control dial is turned into the MAX direction.
7.4 Attaching the sandpaper (Fig. 4)
To attach sanding paper, first remove all dirt or foreign matter from the sanding base plate.
Then attach the sanding paper to the sanding base plate, using the hook-and-loop system
of the sanding paper and the sanding base plate.
Make sure the perforations in the paper coincide with those on the sanding base plate, to
ensure optimal dust collection.
The sandpaper should rest flush on the base plate and must not come loose.
Select sandpaper with the correct grain size.
You can be sure to find the right sandpaper among our product range (see accessories).
WARNING: When removing the sanding paper, follow the above procedure
in reverse order.
WARNING: The sand paper must be stick firmly on sanding plate and
should not come loose.
Never use the machine for sanding magnesium work piece.
7.5 Using the dust bag (Fig. 5)
7.5.1 To install:
Insert the dust bag (4) into dust extraction port (a), rotate the dust bag anti-clockwise by hand
and lock on the correct position, make sure the dust bag is tightly fastened.
7.5.2 To remove:
When removing the dust bag, follow the above procedure in reverse order.
WARNING: Never use the machine for sanding magnesium work piece.
8 GENERAL OPERATING INSTRUCTIONS
Turn on the sander using the ON/OFF switch trigger (2).
Run the sander for a few seconds before contacting the workpiece.
Contact the workpiece with minimal pressure. If the sander is not removing enough
material, try a grittier piece of sandpaper. If you want to remove a lot of material fast, use a
belt sander.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE40030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE40030 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE40030

Powerplus POWE40030 User Manual - German - 9 pages

Powerplus POWE40030 User Manual - Dutch - 9 pages

Powerplus POWE40030 User Manual - French - 9 pages

Powerplus POWE40030 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info