POWDPG7526 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
8.3 Installing/removing battery pack (Fig.3)
▪ Align the ribs of the battery pack with the mounting slots in the blower’s battery port.
▪ Press the battery pack down until it snaps into position.
▪ Press the pop up button and remove the battery pack in the reverse direction.
▪ Remove the battery pack from the blower.
9 ASSEMBLY
WARNING: Switch off and remove battery from machine before adjusting or
cleaning!
9.1 Installing the blower tube(Fig. 4)
Note: Before disassembling the Blower Tube, be sure the ON/OFF trigger
switch is in off position
▪ Fit the blower tube (4) onto the motor housing. Check if the blower tube is firmly secured.
▪ To remove the blower tube, push the release buttons (5).
10 OPERATION
10.1 Intelligent control panel
▪ The battery capacity indicator (7) shows the capacity status of the battery. When it is fully
charged, the indicator is green. When the battery is half charged, the color is yellow. When
only 1 LED is lit red, you should charge the battery.
▪ The air speed indicator (8) shows the four different air speeds. To lower the speed, press
the lower speed button (9). To up the speed, press the higher speed button (10). The air
speed indicator will show which speed you are working in.
▪ The turbo button (11) is only used on occasions when leaves and trash are stuck or when
the normal airflow is not sufficient. An increase in airflow is used mainly for brief
measures. After 15 seconds, the speed will turn back to previous speed automatically. If
you need to keep working in turbo speed, you need to press again.
10.2 Switching on/off
▪ Hold the blower and press the ON/OFF button (12) on the control panel.
▪ To switch off, press the on/off button(12).
