POWDP7080 EN
Copyright © 2019 VARO NV P a g e | 5 www.varo.com
▪ Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
▪ Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
▪ Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
▪ Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
▪ If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
▪ Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
▪ Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
▪ When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
▪ Under abusive conditions, liquid may be ejected from the battery; avoid contact.
▪ If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
5.4 Service
▪ Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY INSTRUCTIONS
▪ Firmly tighten the mixing paddle, and remove the spanner before starting the machine.
▪ Do not use the device in a potentially explosive environment.
▪ Do not use the device to stir solvent or other materials at a temperature above 21°C
▪ Wrap the cable and avoid physical contact with the cable.
▪ Only use extension cords, which are suitable for exterior
▪ Before switching on and off, make sure that the paddle is located in the shaft.
▪ Never mix or stir explosive or inflammable substances.
▪ When mixing, wear proper personal protection measures for eyes, ears, hands and
breathing.
▪ This appliance is not suitable for mixing edible things. The appliance cannot be adequately
cleaned in order to comply with hygiene regulations.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
Use only batteries and chargers applicable for this machine.
7.1 Batteries
▪ Never attempt to open for any reason.
▪ Do not store in locations where the temperature may exceed 40 °C.
▪ Charge only at ambient temperatures between 4 °C and 40 °C.
