POWDP2560 EN
Copyright © 2021 VARO P a g e | 3 www.varo.com
SLIDING MITRE SAW 20V (NO ACCU)
POWDP2560
1 INTENDED USE
This power tool is intended as a stationary machine for making straight and cross cuts in
wood. You can saw hard and soft wood as well as chip and fibre boards.
Only adults may use this tool. Not suitable for professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A & B)
1. Upper blade guard
2. Saw blade
3. Side support bar
4. Fence
5. Saw table
6. Table lock release lever
7. Table insert
8. Scale for mitre angle (horizontal)
9. Mounting hole
10. Lock for clamping device
11. Clamp
12. ON / OFF switch laser
13. Slide bar
14. Operating handle
15. ON / OFF switch
16. Release lever
17. Retaining pin
18. Dust collection bag
19. Bevel scale
20. Lock knob for bevel angle
21. Slide bar lock
22. Side support bar screws
23. Laser
24. Spindle lock
25. Battery pack (not included)
26. Charger (not included)
3 PACKAGE CONTENT LIST
▪ Remove all packaging materials.
▪ Remove remaining packaging and packing inserts (if included).
▪ Check that the package contents are complete.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪ Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
In this packaging, you can find:
1 sliding mitre saw
1 hex wrenches
1 set clamp
1 manual
2 side guides
1 dust bag
