POWDP15680 EN
Copyright © 2022 VARO P a g e | 7 www.varo.com
▪ Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited
and an intense current will flow causing heat generation which may lead to casing rupture
or fire.
▪ Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do not
dispose of the batteries in fire, explosion and/or intense burning may result.
▪ Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
− Carefully wipe the liquid off using a cloth. Avoid skin contact.
− In case of skin or eye contact, follow the instructions below:
✓ Immediately rinse with water. Neutralize with a mild acid such as lemon juice or
vinegar.
✓ In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do
not incinerate the battery.
7.2 Chargers
▪ Never attempt to charge non-rechargeable batteries.
▪ Have defective cords replaced immediately.
▪ Do not expose to water.
▪ Do not open the charger.
▪ Do not probe the charger.
▪ The charger is intended for indoor use only.
8 FEATURES
8.1 Li-ion battery (16)
Advantages of Li-ion batteries:
▪ Li-ion batteries have a higher capacity/weight ratio (more power for less heavy, more
compact, battery).
▪ No memory effect (capacity loss after several charge/discharge cycles) like other type
batteries. (Ni-Cd, Ni-MeH,...).
▪ Limited self-discharge (also see chapter: Storage).
8.2 Brushless Motor
Brushless Motor eliminates carbon brushes, enabling the Brushless Motor to run cooler and
more efficiently for longer life. Brushless Motor efficiently uses energy to match torque and
RPM to the changing demands of the application.
8.3 Dust cap (1)
Use the dust cap (1) to prevent dust from falling over the tool and on yourself when performing
overhead drilling operations.
8.4 Forward/reverse switch (right/left rotation selector) (9)
The rotary hammer has a forward/reverse switch (9) located above the switch trigger.
For forward rotation, release on/off trigger switch (5) and then depress forward/reverse switch
(9) to left handle side. Press forward/reverse switch (9) to right hand side for reverse rotation,
the center position locks the hammer. Always release on/off trigger switch (5) when changing
rotation.