676330
3
Zoom out
Zoom in
Previous page
1/7
Next page
POWAIR0800 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
4 SAFETY RULES
Do not exceed maximum operating pressure of the air tool. The orbit sander could
explode and result in death or serious injury.
Disconnect the tool from air compressor before changing tools or accessories,
servicing and during non-operation.
Do not depress trigger when connecting the air hose.
Never trigger the tool when not applied to a work object. Accessories must be securely
attached.
Make sure all connections are secure and check air hoses for weak or worn condition
before each use.
Never mount grinding wheels on the orbit sander.
5 SYMBOLS
Read the manual
carefully before use.
Denotes risk of personal
injury or damage to the
tool.
Wear eye protection.
Wear noise protection.
Wear a mask in dusty
conditions.
Wear protective gloves.
6 LUBRICATION
An automatic in-line filter-regulator-lubricator is recommended (Fig. 1) as it increases tool
life and keeps the tool in sustained operation. The in-line lubricator should be regularly
checked and filled with air tool oil.
Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to
the exhaust ports and holding the throttle open approximately 30 seconds. The lubricator
is properly set when a light stain of oil collects on the paper. Excessive amounts of oil
should be avoided.
In the event that it becomes necessary to store the tool for an extended period of time
(overnight, weekend, etc.), it should receive a generous amount of lubrication at that time.
The tool should be run for approximately 30 seconds to ensure oil has been evenly
distributed throughout the tool. The tool should be stored in a clean and dry environment.
It is most important that the tool be properly lubricated by keeping the air line lubricator
filled and correctly adjusted. Without proper lubrication the tool will not work properly
and parts will wear prematurely.
Use the proper lubricant in the air line lubricator. The lubricator should be of low air flow
or changing air flow type, and should be kept filled to the correct level. Use only
recommended lubricants, specially made for pneumatic applications. Substitutes may
harm the rubber compounds in the tools, O-rings and other rubber parts.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWAIR0800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWAIR0800 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWAIR0800

Powerplus POWAIR0800 User Manual - German - 7 pages

Powerplus POWAIR0800 User Manual - Dutch - 7 pages

Powerplus POWAIR0800 User Manual - French - 7 pages

Powerplus POWAIR0800 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info