795365
4
Zoom out
Zoom in
Previous page
1/8
Next page
POWAIR0021 EN
Copyright © 2016 VARO P a g e | 4 www.varo.com
is properly set when a light stain of oil collects on the paper. Excessive amounts of oil
should be avoided.
In the event that it becomes necessary to store the tool for an extended period of time
(overnight, weekend, etc.), it should receive a generous amount of lubrication at that time.
The tool should be run for approximately 30 seconds to ensure oil has been evenly
distributed throughout the tool. The tool should be stored in a clean and dry environment.
It is most important that the tool be properly lubricated by keeping the air line lubricator
filled and correctly adjusted. Without proper lubrication the tool will not work properly
and parts will wear prematurely.
Use the proper lubricant in the air line lubricator. The lubricator should be of low air flow
or changing air flow type, and should be kept filled to the correct level. Use only
recommended lubricants, specially made for pneumatic applications. Substitutes may
harm the rubber compounds in the tools, O-rings and other rubber parts.
6 IMPORTANT!!!
If a filter/regulator/lubricator is not installed on the air system, air operated tools should be
lubricated at least once a day or after 2 hours work with 2 to 6 drops of oil, depending on
the work environment, directly through the male fitting in the tool housing. Fig. 1
1. Tool
2. Quick connector
3. Quick coupler
4. Air hose
5. Quick connector
6. Quick coupler
7. Lubricator
8. Regulator (0-8.5 bar)
9. Filter
10. Cut-off valve
11. Air compressor
7 OPERATION
WARNING: Ensure you read, understand and apply safety instructions
before use.
1. Turn air compressor on and allow air tank to fill;.
2. Set the air compressors regulator to 90 PSI. this tool operates at a maximum 90PSI
pressure.
3. The impact wrench is equipped with a torque regulator (beside the air inlet).Turn
torque regulator to desired torque. For 230Ft_Lb turn torque regulator clockwise
until its stops. The torque regulator has a variable adjustment from 50-230Ft_Lbs.
IMPORTANT Torque Values can vary depending on the size of the air
compressor and the cubic feet of air (SCFM) the air compressor delivers
4. The Impact Wrench IS equipped with direction control. Turns the control to position
marked F for Forward or turn the control to R position for Reverse.
5. Depress the trigger (Throttle Level) to operate tool.
6. Release Trigger (Throttle Level) to stop tool.
7. Always disconnect air supply when changing parts or accessories.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWAIR0021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWAIR0021 in the language / languages: English as an attachment in your email.

The manual is 0.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWAIR0021

Powerplus POWAIR0021 User Manual - German - 9 pages

Powerplus POWAIR0021 User Manual - Dutch - 9 pages

Powerplus POWAIR0021 User Manual - French - 9 pages

Powerplus POWAIR0021 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info