Manual Powerplus POWAIR0012 (page 4 of 8) (English)

701822

Zoom out

Zoom in

1/8

POWAIR0012 EN

Automatic lubrication is also possible using the supplied mini oiler that you have to install

between the threaded connector of the tool and the male coupler. Make sure that the oiler

is always filled with suitable oil.

Fig. 1

1. Tool

2. Quick connector

3. Quick coupler

4. Air hose

5. Quick connector

6. Quick coupler

7. Lubricator

8. Regulator (0-8.5 bar)

9. Filter

10. Cut-off valve

11. Air compressor

8 LOADING AND OPERATION

▪ Before each use, drain water out of air compressor tank and condensation from air

lines. After clearing air compressor moisture and lubricating the tool, connect it to an

air hose of a recommended size.

▪ Depress the trigger to remove or install the parts.

8.1 Fitting abrasive cutting discs (Fig. 2)

CAUTION! Always disconnect the tool from the source of compressed air

before fitting or removing an abrasive cutting disc.

Maintain a firm grip on the compressed air line in order to prevent whiplash when you

disconnect the quick-release connector.

▪ Hold the spindle in place with the spindle wrench and remove the spindle screw with

the Allen key as shown.

▪ Place a suitable abrasive cutting disc (available from auto accessory stores) on to the

spindle, making sure that the directional arrow on the abrasive cutting disc (if

applicable) agrees with the direction of rotation marked on the tool.

▪ Place the flange on to the abrasive cutting disc as illustrated.

▪ Hold the spindle in place with the spindle wrench and replace/re-tighten the spindle

screw with the Allen key to secure the abrasive cutting disc and the flange in place.

8.2 Changing abrasive cutting discs (Fig. 2)

▪ Disconnect the tool from the source of compressed air. Maintain a firm grip on the

compressed air line in order to prevent whiplash when you disconnect the quick-

release connector.

▪ Remove the abrasive cutting disc you no longer wish to use from the spindle.

▪ Subsequently fit the new abrasive cutting disc (available from auto accessory stores)

to the spindle as described above.

8.3 Switching the cut off tool ON/OFF

▪ To switch ON: Push the trigger lock and depress the trigger

▪ To switch OFF: Release the trigger

WARNING! Do not over tighten the parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWAIR0012 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWAIR0012

Powerplus POWAIR0012 Additional guide - English - 2 pages

Powerplus POWAIR0012 User Manual - German - 8 pages

Powerplus POWAIR0012 User Manual - Dutch - 8 pages

Powerplus POWAIR0012 User Manual - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWAIR0012 Manual

Product: