582166
7
Zoom out
Zoom in
Previous page
1/15
Next page
POW8561 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7.2 Fitting the parallel fence (Fig. 4)
Insert the parallel fence (5) into the rail of the measuring scale. Check the setting at the
window. Turn the knob to lock the parallel fence (5) into place. In order to obtain a perfectly
parallel cut, you should check the gap between the fence and the saw blade at two positions
using a meter rule.
7.3 Mounting mitre angle stop (Fig. 5)
The mitre angle stop (9) consists of two parts - the stop plate (A) and the angle adjustment (B)
that must be assembled together.
Insert the stop plate (A) into the gaps of the angle adjustment (B) with both adjusting
screws (C), push into the required position and tighten the adjusting screws.
Push the gliding bar (D) of the mitre angle stop into the required bar of the table surface.
Note: Whether you insert the stop plate (A) with the long side upwards or
downwards is determined by the height of the workpiece.
Right-handed operators prefer to push the mitre angle stop into the left bar
of the table surface.
7.4 Mounting the saw blade protector
Risk of injury! The saw blade must be lowered as far as possible in order to
avoid injury.
Lower the saw blade with the hand crank for height
adjustment (4) so that the drill hole (A) in the
cleaving wedge (7) is still accessible.
Loosen wing nuts on the saw blade protector (6)
and remove together with the bolt screw and
washer.
Position the saw blade protector (6) with the
groove on the cleaving wedge and align the hole of
the saw blade protector with the hole of the
cleaving wedge.
Fit the bolt screw through the hole and fix with
washer and wing nut.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW8561 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW8561 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW8561

Powerplus POW8561 User Manual - German - 16 pages

Powerplus POW8561 User Manual - Dutch - 16 pages

Powerplus POW8561 User Manual - French - 15 pages

Powerplus POW8561 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info