481007
5
Zoom out
Zoom in
Previous page
1/11
Next page
POW8002 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
4.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
4.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
5 SPECIFIC SAFETY WARNINGS
Use only the blade flange specified for this tool.
Be careful not to damage the arbor, flange (especially the installing surface) or bolt.
Damage to these parts could result in blade breakage.
Make sure that the table base is properly secured so it will not move during operation.
For your safety; remove the chippings and work debris etc. from the table top and from
inside the extraction port before each operation.
Avoid cutting nails; Remove all nails from the work-piece before cut ting.
Make sure the shaft lock is released before switching on the saw.
Be sure that the blade does not come into contact with the base when the blade is in the
lowest position.
Hold the handle firmly.
Do not perform any operation freehand. The work-piece must be se cured firmly against
the base and guide fence with the vice during all operations; Using your hand may cause
severe injury.
Keep hands out of path of saw blade, never reach around saw blade.
Make sure the blade is clear of the work-piece before the switch is turned on.
5


Need help? Post your question in this forum.

Forumrules
1

Forum

powerplus-pow8002

Reset search

  • I am in need of a blade guard for the Pow8002 saw can you help.
    Yours Terry Brooks Submitted on 9-9-2021 at 14:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW8002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW8002 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW8002

Powerplus POW8002 User Manual - German - 14 pages

Powerplus POW8002 User Manual - Dutch - 13 pages

Powerplus POW8002 User Manual - French - 12 pages

Powerplus POW8002 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info