480896
10
Zoom out
Zoom in
Previous page
1/14
Next page
POW6451 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
8.3 Safety lock
The shredder is equipped with the safety switch at the lock between the top and bottom parts.
If the top part does not fit perfectly and sit fast on the bottom part, the SAFETY SWITCH is
activated and the motor will not work. If this happens:
Remove the plug from the mains socket.
Remove the top part, as described in the previous paragraph.
Clean carefully the cutting and discharge parts and remove any objects that could obstruct
the blades.
Put them together again and tighten the hand screw firmly.
ATTENTION: Never loosen the hand screw before first turning off the On/Off
switch and removing the plug from the mains socket.
8.4 Disassembly
In certain circumstances, e.g. storage after use, you can take the machine apart by
performing the assembly steps in reverse order, as described earlier.
8.5 Instructions for use
Place the material to be shredded in the opening (picture 1, part 1) on the right side. It will
then be automatically drawn into the machine by the cutter as it turns counter clockwise.
Do not stuff the opening completely full to avoid jamming the machine.
Alternate feeding branches and small litter that is a bit wet and decomposed. This will also
help to avoid jamming the cutter.
Squashy kitchen rubbish must be composted, never put it through the shredder!
Branches with leaves must always be entirely through the shredder and out of the way
before feeding new material into the machine. Make sure the shredded material is able to
fall unobstructed into the bag (picture 1, part 3) without blocking the outlet.
The ventilation opening must not be blocked by the shredded material.
Continuous shredding of thick wood or branches can cause the machine to jam.
Soft material like leaves or sprigs can easily block the inlet: use a stick to poke it in.
Always check litter for nails and stones before shredding as they can seriously damage
the shredder.
Watch for vibrations, vibration indicates worn or damaged blades.
Replace blades if necessary.
9 TECHNICAL DATA
Rated Voltage AC
230-240V
Rated Frequency
50Hz
Rated Power
2500W (S6, 40%)
Rotation speed
4050Min-1
Max diameter
40mm
Protection class
II
Int. protection degree
IP24
Collect box
50L
Blade rotation speed
6500Min-1
Cable length
0.35m
Induction motor
NO
Silent
NO
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW6451 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW6451 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW6451

Powerplus POW6451 User Manual - German - 15 pages

Powerplus POW6451 User Manual - Dutch - 15 pages

Powerplus POW6451 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info