480887
8
Zoom out
Zoom in
Previous page
1/14
Next page
POW63707
EN
Copyright © 2010 VARO
P a g e | 8
www.varo.com
When you fit the top push bar you can decide the
height of the push bar by selecting the
appropriate fastening hole (Fig. 3c). Fasten the
top push bar using either the holes L for a low
position or H for a high position.
Screw the top push bar to the bottom push bar
as shown in Fig. 3d.
8 SETTING THE CUTTING HEIGHTS
Important! Adjust the cutting height only when the engine is switched off
and the power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not blunt and that none of the
fasteners are damaged. To prevent any imbalance, replace blunt and/or damaged blades. To
carry out this check, first switch off the motor and pull out the power plug.
Position Cutting depth
1 20mm
2 40mm
3 60mm
The cutting height is adjusted by “spring and bar” system. To do so, turn the equipment upside
down or tilt it to the side. Position both the front and rear axle in the same notch, so that the
cutting blade runs parallel to the lawn.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW63707 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW63707 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW63707

Powerplus POW63707 User Manual - German - 15 pages

Powerplus POW63707 User Manual - Dutch - 16 pages

Powerplus POW63707 User Manual - Dutch - 19 pages

Powerplus POW63707 User Manual - French - 16 pages

Powerplus POW63707 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info