480886
8
Zoom out
Zoom in
Previous page
1/18
Next page
POW637… EN
Copyright © 2010 VARO Page | 8 www.varo.com
When you fit the top push bar you can decide the
height of the push bar by selecting the appropriate
fastening hole (Fig. 3c). Fasten the top push bar
using either the holes L for a low position or H for
a high position.
Screw the top push bar to the bottom push bar as
shown in Fig. 3d.
8 SETTING THE CUTTING HEIGHTS
Important! Adjust the cutting height only when the engine is switched off
and the power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not blunt and that none of the
fasteners are damaged. To prevent any imbalance, replace blunt and/or damaged blades. To
carry out this check, first switch off the motor and pull out the power plug.
For POW63705The cutting height is adjusted by turning the hub cap anticlockwise to
release the axle and removing the hub cap with the screw and tire. The tires can now be fitted
in position 1, 2 or 3 to suit the required cutting height. Fit all four tires at the same height so
that the cutting blade runs parallel to the lawn.
Position Cutting depth
1 20mm
2 40mm
3 60mm
For POW63707 and POW63710The cutting height is adjusted by “spring and bar” system.
The cutting height is adjusted as shown in the figures. To do so, turn the equipment upside
down or tilt it to the side. Position both the front and rear axle in the same notch, so that the
cutting blade runs parallel to the lawn.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW63705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW63705 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW63705

Powerplus POW63705 User Manual - German - 20 pages

Powerplus POW63705 User Manual - Dutch - 19 pages

Powerplus POW63705 User Manual - French - 19 pages

Powerplus POW63705 User Manual - Italian - 18 pages

Powerplus POW63705 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info