480885
13
Zoom out
Zoom in
Previous page
1/18
Next page
POW637… EN
Copyright © 2010 VARO Page | 13 www.varo.com
13 SERVICE DEPARTMENT
§ Damaged switches must be replaced by our after-sales service department.
§ If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
14 STORAGE
Always clean your mower before storage. Store your mower in a clean, dry environment.
To avoid mould on remaining contents, make sure the grass collect bag is empty and dry.
You can fold the handle to save space, loosen the 2 clamps on each side of the handle and
bend the upper handle part towards the front of the machine.
14.1 Long time storage:
Apply some environmentally friendly oil on the mower blade to prevent it from rusting.
14.2 Hibernation
Have your blade sharpened after the mowing season, so your machine is ready for the new
season.
15 TROUBLE SHOOTING
Problem
Cause
Action
Machine fails to operate § Power turned off
§ Mains socket faulty
§ Extension cable
damaged
§ Fuse faulty/blown
§ Mower in long grass
§ Motor protector has
activated
§ Turn power on
§ Use another socket
§ Inspect cable, replace if
damaged
§ Replace fuse
§ Increase height of cut
and tilt mower
§ Allow to cool and
increase height of cut
Machine functions
intermittently
§ Extension cable
damaged
§ Machines internal wiring
damaged
§ Motor protector has
activated
§ Inspect cable, replace if
damaged
§ Allow to cool and
increase height of cut
Machine leaves ragged finish
Or motor labours
§ Height of cut too low
§ Cutting blade blunt
§ Underside of machine
badly clogged
§ Blade fitted upside down
§ Increase height of cut
(see “Height of Cut
Adjustment”)
§ Replace blade (see
“Blade Maintenance”)
§ Clean machine (see
“After Mowing/Storage”)
§ Refit blade correctly (see
“Blade Maintenance”)
Cutting blade not rotating
while machine switched on
§ Cutting blade obstructed
§ Blade nut/bolt loose
§ Clear obstruction
§ Tighten blade nut/bolt
Excessive vibration/noise § Blade nut/bolt loose
§ Cutting blade damaged
§ Tighten blade nut/bolt
§ Replace blade
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW637 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW637 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW637

Powerplus POW637 User Manual - German - 20 pages

Powerplus POW637 User Manual - Dutch - 19 pages

Powerplus POW637 User Manual - French - 19 pages

Powerplus POW637 User Manual - Italian - 18 pages

Powerplus POW637 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info