480885
10
Zoom out
Zoom in
Previous page
1/18
Next page
POW637… EN
Copyright © 2010 VARO Page | 10 www.varo.com
9.3 Stopping
Release the switch lever
ATTENTION : After switching off, the cutting blade will go on turning for a
few seconds, make sure the blade has come to a complete standstill.
CAUTION: Do not rapidly switch off and on.
9.4 Safety button
Important! To prevent the machine switching on accidentally, the lawn mower is equipped with
a safety lock-off which must be pressed before the switching bar can be activated. The lawn
mower switches itself off when the switch is released.
Repeat this process several times so that you are sure that the machine functions properly.
Before you perform any repair or maintenance work on the machine, ensure that the blade is
not rotating and that the power supply is disconnected.
Important! Never open the discharge flap if the grass bag is being emptied
and the motor is still running. The rotating blade can cause serious injuries.
Always secure the discharge flap and grass bag carefully. Always switch off the motor before
you remove these items. The safety distance between the blade casing and the user provided
by the guide struts must be maintained at all times.
9.5 Information on correct mowing
We recommend that you mow in overlapping lines. Only mow with sharp, perfect blades so
that the blades of grass do not fray, making the lawn turn yellow.
The cutting height should be between 4 and 6 cm and the growth before the next cut should
be between 4 and 5 cm. If the lawn grows longer than this on occasion, do not make the
mistake of cutting to normal length straight away since this will damage the lawn. Never cut
the grass by more than half its height. Keep the underside of the mower casing clean and
remove all grass deposits from it. Deposits make it more difficult to start the mower and also
adversely affect the mowing quality and the grass discharge. On slopes mow across the slope
(not in up or down direction).You can counteract the tendency of the mower to slide down the
slope by setting it at an angle upwards. Select the cutting height to suit the actual length of the
grass. Make several passes to ensure that you do not remove more than 4 cm of grass length
in any one pass.
Switch off the motor before you carry out any inspections of the blade. Remember than the
blade will continue to turn for a few seconds after the motor has been switched off. Never
attempt to stop the blade.
Check regularly that the blade is correctly secured, in good condition and well ground. If not,
grind or replace the blade. If the moving blade strikes an object, stop the mower and wait until
the blade has come to a complete standstill. Then check the condition of the blade and the
blade holder. If they are damaged, they must be replaced.
Place the mains lead in loops on the ground in front of the socket. Mow away from the socket
and cable and ensure that the mains lead is always on the section of lawn that you have
already mowed so that you do not run over the mains lead with the mower. As soon as you
see mown grass on the lawn whilst you are mowing, the grass bag will need emptying.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW637 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW637 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW637

Powerplus POW637 User Manual - German - 20 pages

Powerplus POW637 User Manual - Dutch - 19 pages

Powerplus POW637 User Manual - French - 19 pages

Powerplus POW637 User Manual - Italian - 18 pages

Powerplus POW637 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info