480882
4
Zoom out
Zoom in
Previous page
1/9
Next page
POW63655
EN
Copyright © 2010 VARO N.V. Page | 4 www.varo.com
Do not tilt the lawn mower when switching on the motor, except if the lawnmower has to be
tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the
part which is away from the operator.
Do not pull your machine towards you or walk backwards when mowing.
Walk, never run.
Always mow across the face or slopes, never up and down. Exercise extreme caution
when changing direction on slopes. Do not mow excessively steep slopes and always wear
non-slip foot wear.
Mow only in daylight or in good artificial light.
Never use the mower without the grass-bag in place.
Check grass bag frequently for wear or damage.
Switch the motor off and wait until the blade comes to a complete stop before removing the
grass catcher or unclogging chute.
Disengage the self-proppelled mechanism or drive clutch on units so equipped before
switching on the motor.
Never attempt to make a wheel height adjustment while the motor is running.
Do not switch on the motor when standing in front of the discharge chute.
Do not put hands or feet near or under rotating parts. Keep clear off the discharge opening
at all times.
If the equipment should start to vibrate abnormally, switch off the motor and check
immediately for the cause. Vibration is generally a warning of trouble.
The cutting edges of the mower blade are sharp and can lacerate (cut) skin tissue. Care
should be taken when doing any repair work on or around the mower blade. To prevent
injury, it is recommended that gloves be worn or the cutting edge be wrapped with
newspaper or any other suitable material when working on the blade.
Do not use solvent or cleaning fluids to clean your machine-use a blunt scraper to remove
grass and dirt. Always disconnect from the electrical supply before cleaning.
Store your machine in a dry place when not in use, preferably out of the reach of children.
3.4 ELECTRICAL SAFETY
Your machine is designed for use on a.c. (mains) electrical supplies only –do not attempt to
use on any other supply. Plug your machine into a power point –not a light socket.
Your machine is double insulated. This means that all external metal parts are
electrically isolated from the power supply. This is achieved by placing an extra insulation
barrier between the electrical and mechanical parts. Double insulation means greater
electrical safety and obviates the necessity of having the machine earthed.
Always keep the electrical supply cable away from the blades-be aware of its position at all
times.
The extension cable should always be secured firmly on the supporting hook (situated at
the top of the handle pipe) to prevent it from being damaged while the mower is in use.
Never carry your machine by the cable or jerk the cable to separate the connectors. Keep
the cable away from heat sources, oils or sharp edges. Check the condition of your cable
before use and do not use if damaged.
Your machine should always be switched off at the electrical supply, before disconnecting
any plug and socket connector, or extension cables.
WARNING: do not use an extension cable which shows signs of damage. Fit a new cable
complete-do not make any permanent of temporary repairs.
Pull the plug from the socket:
whenever you leave the machine.
before clearing a blockage.
before checking, cleaning or working on the appliance.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW63655 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW63655 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW63655

Powerplus POW63655 User Manual - German - 10 pages

Powerplus POW63655 User Manual - Dutch - 9 pages

Powerplus POW63655 User Manual - French - 9 pages

Powerplus POW63655 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info