582174
6
Zoom out
Zoom in
Previous page
1/9
Next page
POW5103 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
Empty the water tank by removing the plug on the underside of the tank. Make sure that
the water does not get into the motor!
8.1 General information on grinding
Use the dry grinding stone for rough grinding and the wet grinding stone for fine grinding.
Never grinds materials such as wood, plastic or very soft metals (e.g. lead), as they can
block the pores of grinding stones, reducing their effectiveness.
Use dry grinding stones for soft metals and wet grinding stones for hard metals.
Cool the item in water at regular intervals when working for extended periods.
When grinding tools, never allow the metal to blue.
9 REPLACING GRINDING STONES
Grinding stones must be replaced when they have worn more than 40mm or if they become
damaged.
9.1 Wet grinding stone
Empty the water tank by removing the plug (h) on the underside of the tank. Make sure
that the water does not get into the motor! Remove the water tank.
Loosen the nut (i) and remove the outer flange (f) and the old wet grinding stone.
Clean the flanges (f and g).
Attach the new wet grinding stone, to tighten the grinding wheel , hold the grinding wheel
firmly by hand and tighten the nut (the thread is opposite-handed to the direction of
rotation causing automatic tightening) fit the outer flange and secure it with the nut
Reattach the water tank and insert the plug.
9.2 Dry grinding stone
Remove the protective shield and the spark screen. Loosen the nut (l) and remove the
outer flange (k) and the old dry grinding stone.
Attach the new dry grinding stone, to tighten the grinding wheel , hold the grinding wheel
firmly by hand and tighten the nut (the thread is opposite-handed to the direction of
rotation causing automatic tightening) fit the outer flange and secure it with the nut.
Replace the protective shield and the spark screen.
Start the bench grinder and let it run freely for a few minutes to check that the stone is
fitted correctly.
10 CLEANING AND MAINTENANCE
Clean the bench grinder by wiping its exterior parts with a damp cloth. Grinding dust and
filings can be removed using a brush or compressed air.
Do not use corrosive or abrasive cleaning agents.
10.1 Lubrication
The transmission gear for wet grinding stone must be lubricated regularly.
Remove the water tank and the cover (m) from the gearbox (o).
Lubricate the transmission gear (n) with plenty of ball bearing grease.
Replace the cover and water tank.
Do not lubricate the rest of the bench grinder.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW5103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW5103 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW5103

Powerplus POW5103 User Manual - German - 9 pages

Powerplus POW5103 User Manual - Dutch - 9 pages

Powerplus POW5103 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info