582135
7
Zoom out
Zoom in
Previous page
1/10
Next page
POW30633 EN
Copyright © 2013 VARO P a g e | 7 www.varo.com
8.2 Operating instructions :
8.2.1 Setting the torque :
Your cordless drill is fitted with a 20-level torque setting (3) with a slip coupling. This
enables you to select the perfect setting for the job in hand.
Start work with a low torque setting.
When you insert the first screw you will find out how much torque is required.
If the torque provided by the current setting is inadequate, set it to the next level.
If the screw can be inserted as intended down to the surface of the work piece, the
drill/screwdriver is set to the correct torque.
8.2.2 Keyless chuck :
To insert drill bits : set the drill to turn clockwise, insert the bit and hold the front ring on the
chuck. Start the drill at a slow speed.
To remove drill bits : set the drill to turn anti-clockwise and hold front ring on the chuck.
Start the drill at a low speed.
8.2.3 Variable speed
By pressing the ON/OFF switch (1) you can control the speed of the drill from 0 to
maximum speed.
8.2.4 Drilling
Set speed setting to .
When drilling hard smooth surface, use a center punch to mark the desired hole location..
This will prevent the drill bit from slipping off center as you start drilling.
Hold the tool firmly and place the tip of the drill or bit into the work piece, apply enough
pressure to drill
Do not force or apply side pressure to elongate a hole.
8.2.5 Screwing :
Torque setting to 1-20.
Set the direction of rotating slider to clockwise.
For removing screws set it to anti-clockwise.
Use the appropriate flathead or crosshead bit.
9 CLEANING AND MAINTENANCE
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW30633 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW30633 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW30633

Powerplus POW30633 User Manual - German - 11 pages

Powerplus POW30633 User Manual - Dutch - 11 pages

Powerplus POW30633 User Manual - French - 11 pages

Powerplus POW30633 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info