480968
6
Zoom out
Zoom in
Previous page
1/8
Next page
POW30546 EN
Copyright © 2015 VARO NV P a g e | 6 www.varo.com
8.4 Dust collection device (Fig 6)
Before carrying out hammer-drilling work vertically overhead pull dust collecting device over
the drill bit.
8.5 Hammer stop
Your hammer drill is equipped with a hammer stop facility for smooth drilling.
To deactivate the hammer action, turn the lever switch clockwise to position.
To reactivate the hammer action, the lever switch has to be reset to position.
8.6 Drill Stop (Fig 7)
You can deactivate the drilling action of the hammer drill when using it for chiselling work
To do so, turn the lever selector so that the mark coincides with the arrow on the
machine case.
To reactivate the drilling action, the lever selector has to be reset so that the mark
coincides with arrow.
Important! When hammer drilling you will require a low pressure. Too much
pressure will place unnecessary load on the motor. Check the drill bits
regularly. Re-sharpen or replace blunt drill bits.
9 CLEANING AND MAINTENANCE
Remove the mains plug from the socket before carrying out any work on the device.
Keep your machine clean at all times.
Never use caustic agents to clean the plastic parts.
At the end of your work, to prevent dust deposits you should use compressed air (max.3
bar) to clean out the ventilation slots.
Check the carbon brushes regularlydirty or worn carbon brushes result in excessive
sparking and speed faults
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.
10 TECHNICAL DATA
Rated Voltage
Rated Frequency
Rated Power
Rotation speed
Protection class
Drill capacity concrete
Drill capacity steel
Drill capacity wood
Impact rate
Cable length
Chuck type
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW30546 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW30546 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW30546

Powerplus POW30546 User Manual - German - 9 pages

Powerplus POW30546 User Manual - Dutch - 9 pages

Powerplus POW30546 User Manual - French - 9 pages

Powerplus POW30546 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info