645720
6
Zoom out
Zoom in
Previous page
1/9
Next page
POW1880 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
Check the tight seating of the application tool/accessory. Incorrect or not
securely fastened application tools/accessories can come loose during
operation and pose a hazard.
7.1.3 Mounting/Replacing a sandpaper on the sanding plate (Fig. 2)
The sanding plate is fitted with Hook & loop backing for quick and easy fastening of
sandpaper with Hook & loop adhesion.
Before attaching the sandpaper, free the hook & loop backing of the sanding plate from
any debris by tapping against it in order to enable optimum adhesion.
Position the sandpaper flush alongside one edge of the sanding plate, then lay the
sandpaper onto the sanding plate and press firmly.
To remove the sandpaper, grasp it at one of the tips and pull it off from the sanding plate.
8 OPERATION
8.1 Switching ON/OFF (Fig. 3)
First check that the cable and plug are not damaged.
Connect the plug to the power supply.
Switching the power tool ON: slide ON/OFF switch button (2) forward onto position (I).
Switching the power tool OFF: slide ON/OFF switch button backward onto position (O).
8.2 Speed adjusting (Fig. 4)
The tool can be set at 6-speed adjustment positions. The "1" position indicates the lowest and
the "6" position indicates the highest speed, you can adjust different speed by turning the
speed control dial (1) from "1" to "6" position. The operator may have to vary the speed to
optimize working efficiency.
8.3 Application tips
8.3.1 Sawing
Use undamaged faultless saw blades only. Deformed, blunt saw blades or
saw blades that are otherwise damaged can break.
Plunge cuts may only be applied to soft materials, such as wood, gypsum
plaster boards, etc.!
Before sawing with saw blades in wood, particle board, building materials, etc., check these
for foreign objects such as nails, screws, or similar. If required, remove foreign objects or use
saw blades for metal.
8.3.2 Sanding
The removal rate and the sanding pattern are primarily determined by the choice of sanding
sheet, the preset oscillation rate and the applied pressure.
Only flawless sanding sheets achieve good sanding capacity and extend the service life of the
machine.
Pay attention to apply uniform sanding pressure; this increases the working life of the sanding
sheets.
Intensifying the sanding pressure does not lead to an increase of the sanding capacity, but to
increased wear of the machine and the sanding sheet.
For precise on-the-spot sanding of edges, corners and hard to reach areas, it is also possible
to work only with the tip or an edge of the sanding plate.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW1880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW1880 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW1880

Powerplus POW1880 User Manual - German - 10 pages

Powerplus POW1880 User Manual - Dutch - 10 pages

Powerplus POW1880 User Manual - French - 10 pages

Powerplus POW1880 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info