645719
7
Zoom out
Zoom in
Previous page
1/10
Next page
POW1820 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
7.7 Cutting and sanding (fig. A & B)
A cutting disc is used for cutting metal, plastic, wooden and stone workpieces. A sanding disc
is used for sanding wooden and plastic workpieces. A mandrel is used for mounting a cutting
disc or sanding disc.
Place the mandrel (15) in the collet nut (6).
Loosen the screw on the mandrel.
Place a cutting disc (21) or sanding disc (20) on the screw.
Place the screw on the mandrel and tighten it.
7.8 Deburring (fig. A & B)
A grinding disc for deburring is used for removing burrs from metal workpieces. A mandrel is
used for mounting a grinding disc for deburring.
Place the mandrel (15) in the collet nut (6).
Loosen the screw on the mandrel.
Place a grinding disc for deburring (22) on the screw.
Place the screw on the mandrel and tighten it.
7.9 Drilling (fig. A & B)
A drill bit is used to drill holes in plastic, wooden and stone workpieces.
Place a drill bit (10) in the collet nut (6).
7.10 Routing (fig. A & B)
A router bit is used for grooving and for routing figures in plastic, wooden and metal
workpieces.
Place a router bit (13) in the collet nut (6).
7.11 Engraving (fig. A & B)
An engraving needle is used for engraving figures in metal workpieces.
Place an engraving needle (16) in the collet nut (6).
7.12 Grinding and sanding (fig. A & B)
A grinding stone is used for grinding metal, plastic, wooden and stone workpieces. A sanding
band is used for sanding wooden and plastic workpieces.
Place a grinding stone (11) or sanding band with mandrel (12) in the collet nut (6).
7.13 Replacing a sanding band (fig. B)
A sanding band must be replaced when showing signs of wear.
Remove the old sanding band from the mandrel.
Place the new sanding band (18) on the mandrel.
7.14 Using the grinding stone (fig. B)
Use the grinding stone for removing burrs and other irregularities on the workpiece.
7.15 Using the standard (fig. E)
The standard allows the machine to be hung when using the flexible spindle.
Mount the base (23) to the edge of the worktop.
Turn the telescope arm (24) into the base.
Bring the standard to the desired height by sliding the telescope bars (25) in or out as
required.
Tighten the telescope bars one by one.
Mount the flexible spindle to the machine.
Hang the machine to the standard as shown.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW1820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW1820 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW1820

Powerplus POW1820 User Manual - German - 11 pages

Powerplus POW1820 User Manual - Dutch - 11 pages

Powerplus POW1820 User Manual - French - 11 pages

Powerplus POW1820 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info