480990
6
Zoom out
Zoom in
Previous page
1/10
Next page
POW1520 EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
Don't work on any work piece that is too small to clamp in place. If you hold the work piece
with your hand, then you can't operate the tool safely.
When plugging in the power plug, make sure that the operating switch is not located in
position.
Always guide the cable away from the back of the tool.
Do not plane material that contains asbestos.
Never reach into rotating parts.
Never plane over metal objects such as nails and screws.
Never put your fingers into the chip discharge point.
7 BEFORE STARTING WORK
7.1 Dust extraction
When you use the planer you will generate dust that may be harmful. They may ignite or
explode.
Always use the dust bag supplied.
7.2 External extraction
The hose from a suitable vacuum cleaner or an Industrial extraction system may be connected
using the round adapter supplied with the planer.
8 OPERATION
8.1 Switching ON/OFF
First press the safety (release) knob and then the ON/OFF switch. Keep both pressed
whilst using the planer.
To switch off the planer release the ON/OFF switch.
The ON/OFF switch can not be blocked for safety reasons and has to be
pressed all the time.
8.2 Setting the chip distance
The chip thickness can be adjusted infinitely between 0 and 2.0 mm using the combined stop
and adjusting knob:
Turn anti-clockwise to reduce the chip thickness
Turn clockwise to increase the chip thickness.
Set the required chip thickness.
Place the base of the planer flat and firmly on the work piece. The planning blades must
not touch the work piece.
Switch on the planer and move It over the surface of the workpiece with very little
pressure.
Focus the pressure with both hands on the centre of the planer.
When planning hardwood, use a low chip thickness and repeat the planning movement
several times.
Important: To produce a perfect finish the planning blades must be sharp
and the feed must not be too high.
8.3 Mitre edges
There are V groove in the base at the front to allow simple, easy mitering.
Place the base with the selected groove in the edge of the work piece and move the planer
along the groove.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW1520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW1520 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW1520

Powerplus POW1520 User Manual - German - 11 pages

Powerplus POW1520 User Manual - Dutch - 10 pages

Powerplus POW1520 User Manual - French - 10 pages

Powerplus POW1520 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info