389143
7
Zoom out
Zoom in
Previous page
1/13
Next page
POWXQ5234 EN
Copyright © 2012 VARO NV P a g e | 7 www.varo.com
8 FEATURES
8.1 Keyless chuck (1)
Your drill has a keyless chuck that allows you to hand tighten or release drill bit in the
chuck jaws.
8.2 Torque adjustment ring (2)
The drill has a torque adjustment ring. It allows you to select the desired torque depending
on the task you have to perform (drill / different types of screws into different materials).
The proper setting depends on the type of material and the size of screw you are using.
8.3 Forward/reverse selector (right/left rotation selector) (7)
The drill has a forward/reverse selector located above the switch trigger.
Press selector F(orward)/R(everse) on left side of machine (to the right side):
drill turns left (reverse/loosen screws)
Press selector F(orward)/R(everse) on right side (to the left side): drill turns
right (forward/fasten screws).
CAUTION: To prevent damage to the gearbox, always allow the chuck to come to a
complete stop before changing the direction of rotation or selecting another speed (HI-LO).
To stop, release the trigger switch.
8.4 Variable speed (4)
Your cordless drill has a variable speed switch. The rotational speed and torque will in-/
decrease equivalently to applied trigger pressure. This drill has an electric brake, when the
trigger switch is released, the chuck stops turning.
8.5 Speed selector (3)
Your cordless drill has a two-speed gear, designed for drilling or driving at LO (Low) or HI
(High) speed. A slide switch is located on top of your drill to select either LO (Low) or HI
(High) speed.
9 (PRE)OPERATION
WARNING: Do not allow familiarity with the drill make you careless. One careless fraction
of a second is sufficient to inflict severe injury.
9.1 Charging the battery pack
The battery pack for this tool is supplied in a low charge condition to prevent possible
problems, therefore, you have to charge the battery before first use.
Note: The battery will not reach full charge after the first charge. Allow several cycles
(drilling followed by recharging) for them to become fully charged.
TO CHARGE
Charge battery pack solely with the charger provided !
Make sure that the power supply is 230 Volts AC / 50Hz.
Connect the charger to the power supply. Attach the battery pack (5) to the charger by
aligning the ribs on battery pack (5) with grooves on the charger, then slide battery
pack (5) into the charger. The red light is flickering now.
When the battery is fully charged the red light goes off and the green light goes on.
The battery pack will become slightly warm while charging. This is normal and does not
indicate a problem. A forced ventilation helps to cool down the charger.
Do not place charger in an area of extreme heat or cold. It will work best at normal room
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow xq5234 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow xq5234 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow xq5234

Powerplus pow xq5234 User Manual - German - 14 pages

Powerplus pow xq5234 User Manual - Dutch - 14 pages

Powerplus pow xq5234 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info