389264
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWXQ5205 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
9.1 Drilling in Metal
For maximum performance, use high speed steel bits for metal or steel drilling.
Turn drilling mode selector to drilling mode.
Use a center punch to mark the hole location on the workpiece.
Begin drilling at a very low speed to prevent the drill from slipping off the starting point.
Maintain a speed and pressure which allows cutting without overheating the bit. Applying
too much pressure will: overheat the drill, wear the bearing, bend or burn bits, produce off-
center or irregular shaped holes.
When drilling large holes in metal it is recommended to drill with a small drill at first, then
finish with a larger drill, also, lubricate the drill with oil to improve drilling action and
increase drill life.
9.2 Drilling in Wood
For maximum performance, use high speed steel bits for wood drilling.
Turn the drilling mode selector to drilling mode.
Secure the workpiece to prevent it from turning when drilling.
Begin drilling at a very low speed to prevent the drill from slipping off the starting point.
Increase the speed as the drill bites into the material.
When drilling through holes, place a block of wood behind the workpiece to prevent
ragged or splintered edges on the back side of the hole.
Do not lock the trigger in the “on” position when the drill may need to be stopped suddenly.
9.3 Drilling in Masonry/concrete
Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
For maximum performance use tungsten carbide-tipped masonry impact bits when drilling
holes in brick, tile, concrete, etc.
Turn the drilling mode selector to impact mode.
Apply light pressure and medium speed for best results in brick.
Apply additional pressure and high speed for hard materials such as concrete.
When drilling in tile, practice on a scrap piece to determine the best speed and pressure.
Hold power tool by insulated gripping surfaces when drilling in walls/ceilings/floors. The
drill may contact hidden wiring or its own cord.
A drill contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
9.4 stop drilling immediately when :
If any of the following events occur during normal operation, the power supply should be shut
off at once and tool thoroughly inspected by a qualified person and repaired if necessary:
The rotating parts get stuck or speed drops abnormally low
The tool shakes abnormally accompanied by some unusual noise.
The motor housing gets abnormal hot.
Heavy sparks occur around the motor area
10 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow xq 5205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow xq 5205 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow xq 5205

Powerplus pow xq 5205 User Manual - German - 12 pages

Powerplus pow xq 5205 User Manual - Dutch - 12 pages

Powerplus pow xq 5205 User Manual - French - 12 pages

Powerplus pow xq 5205 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info