389264
6
Zoom out
Zoom in
Previous page
1/11
Next page
POWXQ5205 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
When using a cable drum uncoil the cable completely. Cross-section of wire at least 1,5
mm².
Do not overload machine.
Secure all work pieces to be processed sufficiently.
Do not allow children to have access,
Make sure you have a secure stand on ladders or scaffolding when using the drill
freehand.
Localize lines with a line detector in walls where power, water or gas lines are laid
invisibly.
Wear protection goggles and use a dust mask for dust-producing work.
Always arrange for a qualified electrician to carry out repairs
Use only original replacement parts.
Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
The level of noise at the workplace may exceed 85 dB (A). In this case you will need to
introduce noise protection measures for the user. The noise generated by this electric tool
was measured in accordance with the relevant standards.
Use auxiliary handle! Loss of control can cause personal injury.
7 ASSEMBLY
Your POWXQ5205 comes fully assembled.
You only have to insert (when required) the depth gauge in the auxiliary handle.
To do so : loosen the handle by turning it anti-clockwise, insert the depth gauge (curved part
pointing to the front) as far as you want, then re-tighten the handle by turning it clockwise.
Note : take notice that the notch is located in the centre when you position the handle
lvertically.
8 OPERATION
8.1 Switching on/off (fig 1)
To switch on: Press on/off switch (9)
To switch off : release the on/off switch (9).
8.2 Continuous operation (fig 2)
Switch the machine on, then lock the on/off switch by pressing locking button (8).
To switch off: Press switch (9) briefly.
8.3 variable speed (fig 3)
The speed is varied by applying more or less pressure on switch (9).
You can pre-select the speed by turning the knurled screw (7) in switch (9).
When required, you can decrease the setting of the maximum speed by turning the speed
control (7) anti-clockwise, when the machine is not running. This way the on/off switch (9)
, can not be pressed fully offering a lower speed. Let the machine run at no load to check
if the selected speed is suitable.
8.4 Gear selector switch. (fig 4)
(1).Position for 1st gear.
(2).Position for 2nd gear.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow xq 5205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow xq 5205 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow xq 5205

Powerplus pow xq 5205 User Manual - German - 12 pages

Powerplus pow xq 5205 User Manual - Dutch - 12 pages

Powerplus pow xq 5205 User Manual - French - 12 pages

Powerplus pow xq 5205 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info