641858
11
Zoom out
Zoom in
Previous page
1/13
Next page
POW8562 EN
Copyright © 2016 VARO P a g e | 11 www.varo.com
Remove the screws (29 of the table insert.
Remove the table insert
Use the crank and turn to the left to bring the saw blade as far up as it will go.
Use the wrenches (16-17) to remove the screw on the saw blade (Fig. 9) and exchange
the blade with a suitable replacement. Watch the direction of operation! See the arrow on
the saw blade. The teeth must point towards the on/off switch (1).
9.3.2 Adjusting the cleaving wedge (Fig. 10)
The gap between the external edge of the saw blade and the cleaving wedge (9) must be
between three and five millimetres.
Bring saw blade angle to the 0° position and tighten.
Bring the saw blade into the upper position.
Remove the saw blade protector.
Remove the table surface.
Loosen the screws (A) slightly with a suitable combination wrench until the cleaving wedge
(9) is released (do not remove screws)
Set the cleaving wedge lower or higher by pushing upward or downward in the long hole.
Mount all dismantled parts in reverse sequence.
10 STORAGE, TRANSPORTATION
10.1 Storage
Risk of injury! Store the unit in such a way that it cannot be started by
unauthorised persons. Ensure that no one is able to injury themselves on
the stored unit.
Machine damage! Do not store unprotected in a damp environment.
10.2 Transportation
Note: Only lift the unit using the handles.
Crank the saw blade down as far as it will go.
Parts that extend beyond the saw should be removed.
Transport the unit with the assistance of another person and use the handles.
When dispatching, try to use the original packaging, if possible.
11 TECHNICAL DATA
220-240 V
50 Hz
S6 25% 2000W
26 kg
I
IP20
4800 min-1
254 mm
30 mm
2.8 mm
60T
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW 8562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW 8562 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW 8562

Powerplus POW 8562 User Manual - German - 14 pages

Powerplus POW 8562 User Manual - Dutch - 20 pages

Powerplus POW 8562 User Manual - French - 14 pages

Powerplus POW 8562 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info