388920
6
Zoom out
Zoom in
Previous page
1/10
Next page
POW30580 EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
Check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine whether it will operate properly and
perform its intended function. Check for alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual. Have
defective switches replaced by an authorized service centre. Do not use the tool if the
switch does not turn it on and off.
Warning ! The use of any accessory or attachment, other than recommended in this
instruction manual, may present a risk of personal injury.
Have your tool repaired by a qualified person. This electrical tool is in accordance with the
relevant safety requirements. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger to the user.
7 APPLICATION
Before plugging in, make sure that the network's voltage and frequency correspond to those
indicated on the tool's ratings plate; and that the ON/OFF button did not remain blocked The
tool operates, or is in "ON" position, when the trigger (F) is pressed and comes back to the
"stop" position when the same trigger is released. Always hold the tool firmly with both hands,
with handles (A) and (B), while operating. It is sometimes necessary to apply force on the
point of the drill spindle so that the percussion system may operate otherwise the protection
device against off-load operating passes into action.
Adopt a moderate workload; the use of too much force alters safety and efficiency.
8 CHANGING TOOLS
Unplug the tool from the power supply, only use drill spindles compatible with the tool
(HITACHI type imprint)
8.1 Mounting
Clean the drill spindle before use and lightly oil the special imprint. Pull and turn the lock (C)
180° clockwise. Insert the drill spindle (D) in the hexagonal housing, the slot on the lock side.
Pull and turn lock (C) 180° anticlockwise. Pull the drill spindle to check that it can only have a
translation movement de translation of about 3cm.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow 30580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow 30580 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow 30580

Powerplus pow 30580 User Manual - German - 11 pages

Powerplus pow 30580 User Manual - Dutch - 10 pages

Powerplus pow 30580 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info