613960

Powerpeak FHT8313P Manual

33
Zoom out
Zoom in
Previous page
1/62
Next page
Close the battery compartment.
If the data on the display are not or only partly visible, take the batteries out of the
computer. Wait approximately 15 seconds and then replace them.
Keys
RECOVERY: With this button you can measure your condition.
DOWN: With this button you can set the value of the functions TIME, DISTANCE, CALORIES and
TARGET HEART RATE (T.H.R.).
UP: With this button you can set the value of the functions TIME, DISTANCE, CALORIES and TARGET
HEART RATE (T.H.R.).
ENTER: With this button you can:
pass through the following functions: NORMAL, TIME, DISTANCE, CALORIES, TARGET HEART
RATE (T.H.R.).
confirm the set values.
reset the values to '0' by pressing this button during 3 seconds.
Specifications
TIME: 00:00 - 99:59
SPEED: 0,0 - 99,9 km per hour
DISTANCE (DIST.): 0,1 - 999,9 km
CALORIES (CAL.): 0,1 - 999,0 Kcal
TARGET HEART RATE (T.H.R.): 60 - 220 heart beats per minute
REVOLUTIONS PER MINUTE (R.P.M.): 15 - 999
Functions
Auto On/Off
The computer will turn itself on automatically as soon as the device starts moving. If the device is
standing still for more than 4 minutes, the computer will turn itself off automatically. The values will
be reset to '0'.
TIME:
Press the ENTER button until the function TIME appears on the display. Then press the UP or DOWN
button to set the time. The time is adjustable from 1:00 - 99:00 minutes. The computer will count
back from the set value to 00:00. When it has reached the set value, there will be a sound signal. If
you do not set a time, the computer will display the current training time from 00:00 - 99:59
minutes.
SPEED:
The computer will display the current speed from 0,0 - 99,9 km per hour.
RPM
The computer displays the current rotations per minute of 15 - 999 rotations.
DISTANCE
Press the ENTER button until the function DIST. (distance) appears on the display. Then press the UP
or DOWN button to set the distance. The distance is adjustable from 1,0 - 999,0 km. The computer
will count back from the set value to '0,0'. When the set value has been reached, there will be a
sound signal. If you do not set a value, the computer will display the current covered distance from
0,1 - 999,9 km.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerpeak FHT8313P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerpeak FHT8313P in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info