Manual Powerfix PMDL 5 A1 - IAN 107555 (page 75 of 76) (English, German, Dutch, Danish, Swedish, Finnish)

634220

Zoom out

Zoom in

1/76

IAN 107555

MULTI-FUNCTION DETECTOR PMDL 5 A1

MULTI-FUNCTION DETECTOR

Operating instructions

MULTIFUNKTIONSDETEKTOR

Betjeningsvejledning

MULTIDETEKTOR

Bruksanvisning

RAKENNEILMAISIN

Käyttöohje

MULTIFUNKTIONSDETEKTOR

Bedienungsanleitung

MULTIFUNCTIONELE

DETECTOR

Gebruiksaanwijzing

GB / IE Operating instructions Page 1

FI Käyttöohje Sivu 13

SE Bruksanvisning Sidan 25

DK Betjeningsvejledning Side 37

NL / BE Gebruiksaanwijzing Pagina 49

DE / AT / CH Bedienungsanleitung Seite 61

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen

kaikkiin toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och

gör dig bekant med apparatens / maskinens funktioner.

Før du læser, vend siden med billeder frem og bliv bekendt med alle appara-

tets funktioner.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u ver-

trouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie

sich anschließend mit allen Funktionen des Gerätes vertraut.

- 1 -

CONTENT PAGE

Intended use 2

Safety instructions 2

Technical data 4

Description of the appliance 4

Items supplied 4

Unpacking 4

Inserting the battery 5

Measuring distances 5

Measuring areas 7

Measuring volumes 8

Locating concealed objects 8

Laser marking 10

Battery display 11

Cleaning and storage 11

Disposal 11

Warranty & Service 12

Importer 12

Read the operating instructions carefully before using the device for the first time and pre-

serve this booklet for later reference. Pass this manual on to whoever might acquire the devi-

ce at a future date.

- 2 -

MULTI-FUNCTION DETECTOR

PMDL 5 A1

Intended use

The Multi-Measurement Detector is designed for the locating of electrical cables,

of wood and metal objects, for the projecting of laser lines, for the measuring of

areas and volumes as well as for the measuring of distances. The appliance is

intended for domestic use only. Do not use it for commercial purposes. A different

or any other usage is regarded as unintended use and can lead to damages and

injuries. No liabity will be accepted for damage caused by manipulation of the

laser equipment, as well as of the ultrasound transmitter/receiver, or through

disregard of these safety instructions.

Safety instructions

Optimal and safe working with the multi-detector is only possible if you read these

operating and safety instructions completely and strictly follow their instructions.

Risk of injury!

• Do not use the appliance at locations where there is a risk of fire or

explosion, e.g. close to inflammable liquids or gases.

• This appliance may be used by children aged 8 over and by persons with

reduced physical, sensory or mental capabilities or lack of experience and

knowledge, provided that they are under supervision or have been told how

to use of the appliance safely and are aware of the potential risks. Children

must not play with the appliance. Cleaning and user maintenance tasks must

not be carried out by children unless they are supervised.

• Exercise caution with the holding pins. They are sharp and can cause injuries.

Caution regarding damage to the appliance!

• Do not expose the appliance to rainfall. Do not use the appliance in moist

or wet environments.

• Do not place objects containing liquids, e. g. flower vases, on the appliance.

• Do not place any open sources of fire, like candles, on the device.

- 3 -

This appliance contains a Class 2 laser. NEVER direct the laser beam at people

or animals. NEVER look directly into the laser. The laser can cause serious eye

damage.

• Do NOT direct the laser beam at strongly reflective material.

Reflected laser beams are also dangerous.

• Do NOT use the appliance to determine the alternating voltage level in

exposed or non-insulated power cables.

• Do NOT use the appliance as a substitute for a voltmeter.

Notes regarding inaccurate measurement results

The appliance does not always recognise all pipes and power cables.

The following conditions can contribute to inaccurate results:

– very thick walls

– weak battery

– deeply laid power cables or pipework

– shielded cables

– thick walls with thin pipes or power cables

– walls panelled with metal sheets

– very moist conditions

• This appliance is not suitable for detecting power cables in circuits,

– which are isolated from the mains power supply.

– through which direct current flows.

– which are used for computer or telecommunications systems.

• With this appliance pipework made of plastic or similar materials

cannot be detected, only pipework made of metal.

Interaction with batteries:

• Leaking batteries can cause damage to the appliance. If you do not intend

to use the appliance for an extended period, remove the batteries.

• Should the batteries leak, wear protective gloves and clean the battery

compartment with a dry cloth.

• Keep batteries away from children. Children can put batteries into their

mouths and swallow them. Should a battery ever be swallowed, seek

medical attention IMMEDIATELY.

- 4 -

Technical data

Distance measurement by means of Ultrasound

Locating of: power cables, metal, wood

Laser class: 2

Max. output power (P.max): <1 mW

Wave length (λ): 650 nm

according EN60825-1:2007

Power supply: 9 V block battery

Description of the appliance

Measurement point

Display

Material switch (STUD/AC WIRE/METAL)

Button – MODE

Button – Holding pin

Button – READ

Button M (Memory)

Spirit level

Laser beam exit opening

Ultrasound sender/receiver

Function switch (LASER/DETECTOR/DISTANCE)

Button – RM (Read Memory)

Button – Holding pin

Button +/=

Battery compartment

Button – PUSH

Items supplied

• Multi-Function Detector

• 9V block battery

• Operating instructions

Unpacking

Take the Manifold Measurer from its packaging. Remove all transport restraints

and packaging materials. Remove the protective foil from the display

- 5 -

Inserting the battery

1. Open the battery compartment

on the rear side of the Multi-Measurement

Detector.

2. Place the 9 V block battery onto the contacts. Pay heed to the correct polarity.

3. Lay the tape for removal of the battery underneath the 9V block battery and

press it into the battery compartment

Important!

Ensure that the wires are not trapped in any way.

This would lead to irreparable damage to the appliance.

4. Close the battery compartment

. The battery compartment lid must close

with an audible click.

Measuring distances

1. Slide the function switch

to „DISTANCE“. The display

switches itself on.

To switch between the metric and the Anglo-American units of measurement,

press and hold the button MODE

. Then press the button READ

and release

both buttons simultaneously. When you release the buttons, the measurement

units change.

Note:

Measurements start at the measurement point

Should the measurement lie outside the measurement range, „Err“ or an illogical

number appear in the display. The measurement range lies between 0,6m (2’)

and 16 m (53’).

2. Hold the appliance upright towards the wall to which you wish to measure

the distance. The ultrasound sender/receiver

must be at a right-angle to

the wall. For this, use the spirit level: The bubble in the glass

must stand

between the marking lines (see Fig.1).

3. Press the button READ

. The distance measured appears in the display

When you hold the button READ

pressed down and slowly move the

appliance over the surface to be measured, the appliance continually

measures the distances. These are shown on the display

- 6 -

Take note of the following illustrations:

Fig.1 Fig. 2

The further you are from the wall, the wider is the area (a) that the Multi-

Measurement Detector must measure by ultrasound (Fig. 2). Therefore take care

that the Manifold Measurer is always directed at a right angle towards a level

surface (Fig. 1 and 3). Ensure that there are no objects positioned within the

measurement area.

False!

(Fig. 3)

The display illumination glows during the measurement. If a button is not pressed

within ca.15 seconds, the illumination extinguishes. After a further ca.15 seconds

the diplay itself switches off. Press the button READ

, to reactivate the display and

the illumination.

Note:

Inaccurate measurements can also occur through a weak battery.

If the battery is too weak, the battery symbol appears in the display.

- 7 -

Adding distances together

You can add the measured distances together:

1. Measure the first distance as described.

2. Press the button +/=

. In the display

, „+“ appears and the distance

measured carries itself over to the lower line.

3. Measure the next distance. The newly measured distance is shown in the

upper line.

4. Once again, press the button +/=

. The new measurement is added

to the old measurement in the lower line.

5. Repeat steps 2 to 4 to add further measurements.

6. When you wish to leave the addition mode, press the button MODE

All values are erased.

Measuring areas

1. Slide the function switch

to „DISTANCE“.

The display

switches itself on.

2. Press the button MODE

once. In the display

flashes „L“ (Length).

3. Press the button READ

, to measure the length. In the upper line

the measured length appears and „W“ (Width) starts to flash.

4. Press the button READ

to measure the width. The measured width

appears on the upper line and the result of the area calculation in the

lower line.

Adding areas together

1. Measure an area as described in the section „Measuring areas“.

2. Press the button M

. „M+“ appears in the display

The area measured is now saved.

3. Press the button MODE

. The appliance is now ready for the second

measurement.

4. Measure the next area.

5. Press the button +/=

. A „+“ appears in the display

6. Press the button RM

. The result of the first measurement is shown in the

lower line.

7. Press the button +/=

. Both measurements are added together and

the result is shown in the lower line.

8. Repeat the steps 2 to 7 to add in further measurement values.

9. When you wish to leave the addition mode, press the button MODE

All values are erased.

- 8 -

Measuring volumes

1. Slide the function switch

to „DISTANCE“.

The display

switches itself on.

2. Press the button MODE

twice. In the display

flashes „L“ (Length).

3. Press the button READ

, to measure the length. In the upper line the

measured length appears and „W“ (Width) starts to flash.

4. Press the button READ

to measure the width. In the upper line the

measured width appears and „H“ (Height) starts to flash.

5. Press the button READ

to measure the height. The measured height appears

in the upper line. In the lower line appears the result of the volume calculation.

Adding volumes together

1. Measure a volume as described in the section „Measuring volumes“.

2. Press the button M

. „M+“ appears in the display

The volume measured is now saved.

3. Press the button MODE

. The appliance is now ready for the second

measurement.

4. Measure the next volume.

5. Press the button +/=

. A „+“ appears in the display

6. Press the button RM

. The result of the first measurement is shown in the

lower line.

7. Press the button +/=

. Both measurements are added together and

the result is shown in the lower line.

8. Repeat the steps 2 to 7 to add in further measurement values.

9. When you wish to leave the addition mode, press the button MODE

All values are erased.

Locating concealed objects

Notice:

• Before using the appliance for this task, first test it by locating a pipeline

or electrical power cable at a known position.

• In cases of doubt, always ask a qualified building contractor.

Attention!

Should the appliance find a live wire carrying alternating current,

appears in the display. Under no circumstances should you drill at this

location! Danger of electric shock!

- 9 -

The locating of concealed objects is the same in all three modes (STUD = wood,

AC WIRE = live electric power cables, METAL = metal).

1. Slide the function switch

to „DETECTOR“.

2. Slide the material switch

to STUD, AC WIRE or METAL.

3. First of all, the appliance must be calibrated. Place it flat against the wall

where you wish to search for concealed objects.

4. Press and hold the button PUSH

until the signal tone hums.

The appliance has now adjusted itself to the wall thickness.

Continue to keep the button PUSH

pressed down.

5. Move slowly along the wall with the appliance. As the arrows in the

display move closer to the centre of the display, you are getting closer

to the concealed object. When the arrows touch and a constant signal

tone is heard, mark this position (see Fig. 4).

Fig. 4

6. Now repeat the procedure, but this time approach the object from the other

side. As soon as the signal tone sounds, mark this position (see Fig. 4).

The concealed object runs between these two positions.

- 10 -

Locating wood objects

1. Proceed with the search for wood objects as described in the section

„Locating concealed objects“.

2. When the Multi-Measurement Detector has found an object, mark it.

To be sure that the object is wood, slide the material switch

to METAL.

3. Now search in the same position for metal. Should the Multi-Measurement

Detector not find anything, then the object is wood. Should it find something,

then the object is metal.

In this case, search again at a different position in the mode „STUD“ and repeat

steps1 to 3.

Laser marking

The appliance contains a Class 2 laser. NEVER direct the laser beam at

people or animals. NEVER look directly into the laser. The laser can cause

serious eye damage.

You can use laser marking for the exactly horizontal positioning of pictures,

shelves etc.

1. Place the function switch

to „LASER“. A laser line is projected.

Horizontal laser line

Attention!

Exercise caution with the holding pins. They are sharp and can cause injuries.

1. Hold the Manifold Measurer horizontally against the wall and align it with

the assistance of the spirit level

. The air bubble must stand between the

two marking lines.

2. Push both of the holding pins (

) buttons firmly downwards.

The pins lightly bore themselves into the wall so that the appliance

does not fall to the floor. The laser throws a horizontal line onto the wall.

Note:

The holding pins do not function on stone or metal walls.

The walls must have a soft upper surface.

- 11 -

Vertical laser line

1. Secure a strong thread in the eyelet above the measurement point

2. Hang the Multi-Measurement Detector on the wall at the position where

you want to project the vertical line. The Manifold Measurer hangs like

a plumbline, perpendicularly downwards. The laser throws a vertical

line onto the wall.

Battery display

A battery symbol appears in the display

when the battery is weak resp. almost

discharged. Replace the battery as soon as possible (see section „Inserting the

battery“). If you do not, the measurements will be false.

Cleaning and storage

• Store the appliance at a dry and frost-free location.

• If you do not intend to use the appliance for an extended period,

remove the battery from the battery compartment.

• Clean the appliance with a soft, dry cloth.

• Do not use chemical or abrasive cleaning agents.

These could damage the housing.

Disposal

Do not dispose of the appliance in your normal domestic waste.

This product is subject to the European guideline 2012/19/EU.

Dispose of the appliance through an approved disposal centre or at your

community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Battery disposal!

Batteries may not be disposed of with normal domestic waste.

All consumers are statutorily obliged to dispose of batteries at

the collection point in their community/district or with the original supplier.

The purpose of this obligation is to ensure that batteries can be disposed of

in an environmentally friendly manner. Only dispose of batteries when they

are fully discharged.

Dispose of all packaging materials in an environmentally

friendly manner.

- 12 -

Warranty & Service

The warranty for this appliance is for 3 years from the date of purchase. The ap-

pliance has been manufactured with care and meticulously examined before deli-

very. Please retain your receipt as proof of purchase. In the event of a warranty

claim, please make contact by telephone with our Service Department. Only in

this way can a post-free despatch for your goods be assured.

The warranty covers only claims for material and manufacturing defects, but not

for transport damage, for wearing parts or for damage to fragile components,

e.g. buttons or batteries. This product is for private use only and is not intended

for commercial use. The warranty is void in the case of abusive and improper

handling, use of force and internal tampering not carried out by our authorized

service branch. Your statutory rights are not restricted in any way by this warranty.

The warranty period will not be extended by repairs made under warranty. This

applies also to replaced and repaired parts. Any damage and defects extant on

purchase must be reported immediately after unpacking the appliance, at the la-

test, two days after the purchase date. Repairs made after the expiration of the

warranty period are subject to payment.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: kompernass@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: kompernass@lidl.ie

Hotline availability:

Monday to Friday 08:00 - 20:00 (CET)

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

IAN 107555

- 17 -

Pariston asettaminen

1. Avaa monitoimimittauslaitteen taustapuolella oleva paristokotelo

2. Työnnä 9 V:n neppariparisto liittimiin. Varmista oikea napaisuus.

3. Aseta pariston irrotusnauha 9V:n nepparipariston alle ja paina paristo

paristokoteloon

Huomaa!

Varmista, etteivät johdot jää puristuksiin.

Tämä aiheuttaa laitteelle korvaamatonta vahinkoa.

4. Sulje paristokotelo

. Paristokotelon kannen tulee lukittua kuuluvasti

paikoilleen.

Etäisyyksien mittaaminen

1. Työnnä toimintokytkin

asentoon „DISTANCE“. Näyttö

kytkeytyy päälle.

Vaihda metrijärjestelmän ja angloamerikkalaisten mittayksiköiden välillä

painamalla painiketta MODE

ja pitämällä sitä painettuna. Paina sitten

painiketta READ

ja vapauta molemmat painikkeet samanaikaisesti.

Kun päästät painikkeet irti, mittayksiköt vaihtuvat.

Ohje:

Mittaus alkaa mittauspisteestä

Jos mitta on mittausalueen ulkopuolella, näytössä näkyy „Err“ tai epälooginen

luku. Mittausalue sijaitsee välillä 0,6m (2’) ja 16m (53’).

2. Pidä laitetta vaakasuorassa sen seinän edessä, johon haluat mitata

etäisyyden. Ultraäänilähettimen/-vastaanottimen

tulee osoittaa seinään

suorassa kulmassa. Käytä tähän vesivaakaa: Vesivaa'an

kuplan tulee

sijaita merkintäviivojen välissä (katso kuva 1).

3. Paina READ-painiketta

. Näyttöön

ilmestyy mitattu etäisyys. Jos pidät

READ-painiketta

painettuna ja liikutat laitetta hitaasti edelleen mitattavan

pinnan yläpuolella, laite mittaa etäisyyttä jatkuvasti. Etäisyydet näytetään nä-

ytöllä

- 18 -

Huomaa seuraavat kuvat:

Kuva 1 Kuva 2

Mitä kauempana seinästä seisot, sitä leveämpi on se pinta (a), jonka

monitoimimittauslaite ultraäänen avulla mittaa (kuva 2). Varmista siksi, että

monitoimimittauslaite on aina suunnattu tasaiseen pintaan suorassa kulmassa

(kuvat 1 ja 3). Varmista, ettei mittausalueella sijaitse mitään esineitä.

Väärin!

Kuva 3

Mittausten aikana näytön valaistus palaa. Jos mitään painiketta ei paineta n.

15 sekuntiin, näytön valaistus sammuu. Seuraavien n. 15 sekunnin kuluttua

sammuu näyttö. Näyttö ja valaistus aktivoidaan uudelleen painamalla READ-

painiketta

Ohje:

Liian heikot paristot aiheuttavat epätarkkoja mittaustuloksia. Jos paristo on lii-

an heikko, näyttöön ilmestyy paristosymboli.

- 19 -

Etäisyyksien laskeminen yhteen

Voit laskea mitattuja etäisyyksiä yhteen:

1. Mittaa ensimmäinen etäisyys kuvatulla tavalla.

2. Paina +/=-painiketta

. Näyttöön

ilmestyy „+“ ja mitattu etäisyys

siirtyy alimmalle riville.

3. Mittaa seuraava etäisyys. Uusi mitattu etäisyys näytetään ylemmällä rivillä.

4. Paina uudelleen +/=-painiketta

. Uusi mittausarvo lisätään alemman rivin

vanhaan mittausarvoon.

5. Toista vaiheet 2–4 lisätäksesi summaan lisää mittausarvoja.

6. Kun haluat poistua Additions-yhteenlaskutilasta, paina MODE-painiketta

Kaikki arvot poistetaan.

Pinta-alojen mittaaminen

1. Työnnä toimintokytkin

asentoon „DISTANCE“. Näyttö

kytkeytyy päälle.

2. Paina MODE-painiketta

kerran. Näytössä

vilkkuu „L“ (Length = pituus).

3. Paina READ-painiketta

mitataksesi pituuden. Ylemmälle riville ilmestyy

mitattu pituus ja „W“ (Width = leveys) alkaa vilkkua.

4. Paina READ-painiketta

mitataksesi leveyden. Ylemmälle riville ilmestyy

mitattu leveys ja alemmalle riville pinta-alalaskelman tulos.

Pinta-alojen laskeminen yhteen

1. Mittaa yksi pinta-ala luvussa „Pinta-alojen mittaaminen“ kuvatulla tavalla.

2. Paina M-painiketta

. Näyttöön

ilmestyy „M+“. Mitattu pinta-ala on

tallennettu.

3. Paina MODE-painiketta

. Laite on nyt valmis toista mittausta varten.

4. Mittaa seuraava pinta-ala.

5. Paina +/=-painiketta

. Näyttöön

ilmestyy „+“.

6. Paina RM-painiketta

. Alarivillä näytetään enimmäisen mittauksen tulos.

7. Paina +/=-painiketta

. Molemmat mittaukset lasketaan yhteen ja tulos

näytetään alemmalla rivillä.

8. Toista vaiheet 2–7 lisätäksesi summaan lisää mittausarvoja.

9. Kun haluat poistua Additions-yhteenlaskutilasta, paina MODE-painiketta

Kaikki arvot poistetaan.

- 24 -

Takuu & huolto

Laitteen takuu on 3 vuotta ostopäivästä. Laite on valmistettu huolellisesti ja tarkistet-

tu tarkasti ennen toimitusta. Säilytä ostokuitti todisteeksi takuun voimassaolosta.

Ota takuutapauksessa puhelimitse yhteyttä huoltopisteeseesi. Vain näin voidaan

taata tuotteesi maksuton lähettäminen huoltoon.

Takuu koskee ainoastaan materiaali- ja valmistusvirheitä, ei kuitenkaan kuljetus-

vaurioita, kuluvia osia tai herkästi vaurioituvien osien, esim. kytkinten tai akkujen

vaurioita.

Tuote on tarkoitettu ainoastaan yksityiseen, ei kaupalliseen käyttöön.

Väärä tai asiaton käyttö, väkivallan käyttö ja muiden kuin valtuutetun huoltopi-

steen suorittamat korjaukset aiheuttavat takuun raukeamisen. Tämä takuu ei rajoi-

ta kuluttajan lakisääteisiä oikeuksia.

Takuukorjaus ei pidennä takuuaikaa. Tämä koskee myös vaihdettuja ja korjattuja

osia. Mahdollisista jo ostettaessa olemassa olevista vahingoista ja puutteista on il-

moitettava välittömästi pakkauksesta purkamisen jälkeen, kuitenkin viimeistään

kaksi päivää ostopäiväyksen jälkeen. Takuuajan jälkeen suoritetut korjaukset ovat

maksullisia.

Huolto Suomi

Tel.: 010309 3582

E-Mail: kompernass@lidl.fi

Palvelupuhelin:

Maanantaista perjantaihin klo 8:00 – 20:00 (CET)

Maahantuoja

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

IAN 107555

- 25 -

Innehållsförteckning Sidan

Föreskriven användning 26

Säkerhetsanvisningar 26

Tekniska specifikationer 28

Beskrivning 28

Leveransens omfattning 28

Uppackning 28

Lägga i batteri 29

Mäta avstånd 29

Mäta ytor 31

Mäta volym 32

Lokalisering av dolda objekt 32

Lasermarkering 34

Batteristatusvisning 35

Förvaring och rengöring 35

Kassering 35

Garanti & Service 36

Importör 36

Läs igenom bruksanvisningen noga innan du börjar använda apparaten och spara den för

senare bruk. Lämna över bruksanvisningen tillsammans med apparaten om du överlåter den

till någon annan person.

- 26 -

MULTIDETEKTOR PMDL 5 A1

Föreskriven användning

Den multifunktionella mätaren med detektor och laser ska användas för att söka

efter elledningar, föremål av trä och metall, projicera laserlinjer, beräkna ytor,

volymer och avstånd. Den är endast avsedd för privat bruk. Använd inte

apparaten yrkesmässigt. All annan eller utökad form av användning räknas som

felaktig och kan leda till skador på person och material. Tillverkaren ansvarar inte

för skador som är ett resultat av att laseranordningen eller ultraljudssändaren/

mottagaren manipulerats eller för att säkerhetsanvisningarna inte följts.

Säkerhetsanvisningar

Multidetektorn fungerar endast optimalt och man kan bara arbeta säkert med

den genom att läsa igenom hela bruksanvisningen samt säkerhetsanvisningarna

och följa dem exakt.

Skaderisk!

• Använd inte apparaten där det råder ökad brand- eller explosionsrisk,

t ex i närheten av brännbara vätskor och gaser.

• Den här produkten kan användas av barn som är minst 8 år och av perso-

ner med begränsad fysisk, sensorisk eller mental förmåga eller bristande er-

farenhet och/eller kunskap om de hålls under uppsikt eller instruerats i hur

produkten används på ett säkert sätt och inser vilka risker det innebär. Barn

får inte leka med produkten. Rengöring och allmän service får bara göras

av barn om någon vuxen håller uppsikt.

• Var försiktig när du handskas med fäststiften. De är mycket vassa och kan

orsaka skador.

Varning för skador på apparaten!

• Utsätt inte apparaten för regn. Använd den inte heller i fuktig eller våt

omgivning.

• Ställ inga vätskefyllda kärl, t ex blomvaser, på apparaten.

• Ställ inga öppna lågor, t ex stearinljus, på apparaten.

- 72 -

Garantie und Service

Sie erhalten auf dieses Gerät 3 Jahre Garantie ab Kaufdatum. Das Gerät wurde

sorgfältig produziert und vor Anlieferung gewissenhaft geprüft. Bitte bewahren

Sie den Kassenbon als Nachweis für den Kauf auf. Bitte setzen Sie sich im Ga-

rantiefall mit Ihrer Servicestelle telefonisch in Verbindung. Nur so kann eine ko-

stenlose Einsendung Ihrer Ware gewährleistet werden. Die Garantieleistung gilt

nur für Material- oder Fabrikationsfehler, nicht aber für Transportschäden, Ver-

schleißteile oder für Beschädigungen an zerbrechlichen Teilen, z. B. Schalter

oder Akkus. Das Produkt ist lediglich für den privaten und nicht für den gewerbli-

chen Gebrauch bestimmt. Bei missbräuchlicher und unsachgemäßer Behandlung,

Gewaltanwendung und bei Eingriffen, die nicht von unserer autorisierten Service-

Niederlassung vorgenommen wurden, erlischt die Garantie. Ihre gesetzlichen

Rechte werden durch diese Garantie nicht eingeschränkt. Die Garantiezeit wird

durch die Gewährleistung nicht verlängert. Dies gilt auch für ersetzte und repa-

rierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen

sofort nach dem Auspacken gemeldet werden, spätestens aber zwei Tage nach

Kaufdatum. Nach Ablauf der Garantiezeit anfallende Reparaturen sind kosten-

pflichtig.

Service Deutschland

Tel.: 0800 5435 111

(Kostenfrei aus dem dt. Festnetz/Mobilfunknetz)

E-Mail: kompernass@lidl.de

Service Österreich

Tel.: 0820 201 222 (0,15 EUR/Min.)

E-Mail: kompernass@lidl.at

Service Schweiz

Tel.: 0842 665566 (0,08 CHF/Min.,

Mobilfunk max. 0,40 CHF/Min.)

E-Mail: kompernass@lidl.ch

Erreichbarkeit Hotline:

Montag bis Freitag von 8:00 Uhr - 20:00 Uhr (MEZ)

Importeur

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

IAN 107555

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix PMDL 5 A1 - IAN 107555 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerfix PMDL 5 A1 - IAN 107555 Manual

Product: