Manual Powerfix PKRS 1.5 A1 - IAN 102693 (page 11 of 75) (English, German, Dutch, Danish, Swedish, Finnish)

576671

Zoom out

Zoom in

1/75

PKRS 1.5 A1

Melting and ﬁ lling (Figs. C + D)

♦ Place the On/Oﬀ switch at the position

“ON” to switch the appliance on.

♦ Press and hold the activation button to

heat up the wax melter tip

♦ Now melt small portions of the hard wax and

place them into the damaged area, until it is

slightly overﬁ lled. Start with the light colour

tones and progress step by step to the dark

colour tones.

Filling (Fig. E)

♦ For vertical surfaces it is recommended to mix

the colour tone beforehand, collect it on the

spatula

and then ﬁ ll the damaged area.

When working on curved areas the scraper

with curvature

should be used to ﬁ ll hard

wax into the damaged area.

Smoothing (Fig. F)

♦ Allow the hard wax to cool for a few seconds

(about 10 seconds).

♦ After cooling, smooth any protrusion with the

planing grooves of the scraper

. Use only

light pressure to smooth the protrusion.

Fine matching (Fig. G)

♦ For ﬁ ne matching, now imitate any marbling

with a darker colour tone.

♦ Subsequently, again smooth any protrusion

with the planing grooves of the scraper

Degreasing (Fig. H)

♦ To ﬁ nish, remove the last hard wax residues

with the sanding sponge

. Thereby the

gloss level of the surface will also be simulta-

neously matched. Job done!

Cleaning the planer grooves (Fig. I)

♦ Place the cleaning scraper on the cooled

wax melter tip

and scrape the wax resi-

dues from the plane grooves.

IB_102693_PKRS1.5A1_LB3.indb 8 24.07.14 09:29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix PKRS 1.5 A1 - IAN 102693 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerfix PKRS 1.5 A1 - IAN 102693 Manual

Product: