679052

Powerfix PHG 2500 C3 - IAN 113376 Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
9
PHG 2500 C3
GB
IE
Heating operation
♦ Ensure that the operating switch
2
is at position 0 (off).
♦ If the appliance is being taken into service for the first time or if you want
to reset the desired temperature, turn the temperature control
3
to the
MAX position.
♦ Set the operating switch
2
to the desired operating mode.
Setting the temperature
♦ Turn the temperature regulator
3
firstly to the Max position.
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
3
anti-clockwise until a slight click sound is heard.
This means that the heating element is now switched off.
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
► The ventilator continues to run when the temperature regulator has switched
the heating element off. The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
Overheating protection
The appliance is fitted with a temperature regulator controlled overheating protector.
Should the appliance become too hot internally, the heating element switches
itself off automatically. However, the fan continues to run, so that a rapid cooling
can be achieved. Once the appliance has cooled itself down, the heating ele-
ment switches back on automatically.
WARNING
As a general rule, overheating has a reason! It can mean a risk
of fire!
► Check that the appliance can sufficiently disburse the heat generated:
Is the appliance covered or is it too close to a wall or other obstacle?
Are the grilles on the front or back clear? Is the ventilator blocked?
► If possible, eliminate the problem or contact the Service Hotline
(see Chapter Service).
► Even if you cannot find a cause, but the overheating protection triggers
a second time, you must return the appliance to Customer Services for
inspection or repair.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerfix PHG 2500 C3 - IAN 113376 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix PHG 2500 C3 - IAN 113376 in the language / languages: English, German as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info