779289
43
Zoom out
Zoom in
Previous page
1/50
Next page
PowerFix PEK 2.4 B1
English - 41
Use of the device
Switching the endoscope camera on and off
The endoscope camera is switched on and off by pressing the on/off switch
[4]. The power indicator [2] lights up green and, after a short delay, the image
is shown on the screen [1].
Lighting
The camera head is equipped with 4 LEDs. This lighting can be switched on
with the lighting button [7]. This button can also be used to gradually increase
the brightness of the LEDs by pressing it several times. When the highest level is
reached and the lighting button [7] is pressed again, the lighting switches off.
Screen brightness
The brightness setting of the screen can be changed with the brightness
adjustment button [8]. The brightness of the screen is gradually increased when
this button is pressed several times. When the highest level is reached and the
brightness adjustment button [8] is pressed again, the brightness setting is reset
to the default value.
Changing the display
The camera image can be rotated by 180° and mirrored vertically or
horizontally by pressing the view button [6]. This setting enables you to select
four different views. When the device is switched off, the last setting is retained.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerfix PEK 2.4 B1 - IAN 86588 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix PEK 2.4 B1 - IAN 86588 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info