Manual Powerfix PDM 300B1 - IAN 285130 (page 14 of 64) (English, German, Dutch, Danish)

754135

Zoom out

Zoom in

1/64

POWERFIX PDM 300 B1

12 - English

7.9. Diode test

Ensure that all circuit elements, circuits and components to be measured and other test objects are

completely switched off and discharged. Otherwise, the multimeter could be damaged.

 Connect the black test lead to the COM jack [4] and the red test lead to the Ω V mA jack [5].

 Set the range selector switch [3] to the position in the Ω measuring range.

 Connect the red test probe [6] to the anode and the black test probe [6] to the cathode of the diode

to be tested.

 The forward voltage is indicated in volts on the display [1]. If "1" is displayed on the display [1], the

diode is measured in the reverse biased-direction or the diode is defective. Perform an opposite pole

measurement for check purposes.

7.10. HOLD function

A measured value on the display [1] can be saved by pressing the HOLD button [2]. Press the HOLD

button [2] again to return to the measuring mode.

7.11. Setting up the multimeter

You can set up the multimeter. Open out

the stand at the back of the multimeter to

set up the multimeter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix PDM 300B1 - IAN 285130 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerfix PDM 300B1 - IAN 285130

Powerfix PDM 300B1 - IAN 285130 User Manual - French, Portuguese, Spanish - 142 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerfix PDM 300B1 - IAN 285130 Manual

Product: