Manual Powercraft PGM6002 - PGG-800 (page 11 of 20) (English)

584973

Zoom out

Zoom in

1/20

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626

Web Support: www.servotool.eu

Model Number: PGG-800 11

Assembling and operations

Starting the generator

Fig. 1 + 3 + 4

1. Turn on fuel tap (8).

2. Turn on engine switch (5).

3. Move choke lever (6) to closed position (to restart a warm engine, leave

the choke lever in open or half-open position).

4. Pull slowly on the starter cord until it engages, then pull sharply to start

the engine (7).

5. Allow the engine to run until it warms up, and then move the choke

lever to the open position (6).

Using the AC Output (230 V)

• Startthegenerator.

• Plugintheelectricalapplianceplug.

Stopping the generator

Fig. 1 + 4

1. Unplug all cords (5)

2. Turn engine switch to “OFF” (5)

3. Turn off fuel tap (8)

Using the DC Output (12V)

Fig. 5

• PlugthechargingleadintotheDCoutput

• Startthegenerator

• Connecttheredclampwiththe+terminalofthebattery

• Connecttheblackclampwiththe–teminalofthebattery

PGM6002 Ma GB-IRE-1101-17.indd 11 1/18/11 3:35:38 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powercraft PGM6002 - PGG-800 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powercraft PGM6002 - PGG-800 Manual

Product: