627530
56
Zoom out
Zoom in
Previous page
1/78
Next page
Owners Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007 PowerBoss
®
CORE 50 Sweeper Scrubber
Page 54
PowerBoss
®
The Power of Clean
BRAKE ADJUSTMENT
1. Park the machine on a level surface and turn on the scrubdeck to lower the
brushes to the floor. Turn off the engine.
2. Chock both sides of the right front tire.
3. Adjust the brakes for wear by locating the brake adjustment turnbuckle. This
is located beneath the frame to the rear of the brake equalizing bar and
directly below the brake pedal.
4. Using a 9/16” open end wrench loosen the locking nut positioned against the
rear clevis. Back the nut away from the clevis several turns.
5. Using the 9/16” wrench, turn the threaded bar by grabbing the hex section at
the center. If view from the rear of the machine, turning the bar
counterclockwise will tighten the brakes. Rotate the turnbuckle bar two full
turns.
6. Retighten the locking nut against the rear clevis.
7. Test the brakes. Readjust if required.
TIRES
CHANGING SOLID TIRES
1. Remove the tire from the vehicle by removing the five inner lug nuts.
2. Remove the five flathead bolts and nuts.
3. Press the tire from the rim.
4. Press the large rim half into the new tire.
5. Mount the small rim half and secure with flathead bolts.
6. Reinstall the tire on the machine.
SERVICE INSTRUCTIONS (CONTINUED)
BRAKES & TIRES
NOTE
The procedures which follow apply to SOLID TIRES ONLY.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Core 50 - Sweeper Scrubber at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Core 50 - Sweeper Scrubber in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info