627530
40
Zoom out
Zoom in
Previous page
1/78
Next page
Owners Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007 PowerBoss
®
CORE 50 Sweeper Scrubber
Page 38
PowerBoss
®
The Power of Clean
SERVICE INSTRUCTIONS (CONTINUED)
HYDRAULICS SYSTEM
FILLING THE FLUID RESERVOIR
1. When the machine is cool and the hopper is in the lowered position, remove
the fill cap located in the top of the fluid reservoir. Fluid level should be to the
grove on the dipstick attached to the fill cap.
2. If the fluid level is not acceptable, add hydraulic fluid.
SUS @100° F 510-560
SUS @ 210° F 78-84
CHANGING THE HYDRAULIC FLUID
1. Turn off the engine and engage the parking brake.
2. Swing the engine frame open and secure with the locking pin.
3. Place a drain pan on the floor below the reservoir.
4. Remove the drain plug located on the bottom rear of the reservoir and
allow the fluid to drain.
5. Discard the fluid in an approved manner, then replace and retighten the
drain plug.
6. Remove the filler / breather cap located on top of the reservoir and fill the
reservoir with approved hydraulic fluid.
7. Check the dipstick to ensure the proper level is achieved.
8. Remove the dipstick from the old cap and attach to a new fill cap / breather.
9. Install the new filler / breather cap assembly.
10. Check the drain plug for leakage.
NOTE
HYDRAULIC FLUID VISCOSITY SPECIFICATIONS
The reservoir is located inside the machine and is
accessible through the top side door.
CAUTION
DO NOT OVERFILL! DO NOT USE TRANSMISSION FLUID
INSTEAD OF HYDRAULIC FLUID. HYDRAULIC OIL MUST
MEET THE SPECIFICATIONS LISTED TO ENSURE
PROPER PERFORMANCE.
NOTE
Fourteen (14) gallons (US) (53 liters) of fluid are required.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Core 50 - Sweeper Scrubber at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Core 50 - Sweeper Scrubber in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info