627531
77
Zoom out
Zoom in
Previous page
1/96
Next page
Armadillo 9X Sweeper #4100033 Rev. D 07/15
© 2014-2015 Minuteman International, Inc.
Page 77
PREVENTATIVE MAINTENANCE
Filter Replacement
1. Insert the panel lter.
2. Install the shaker motor assembly.
3. Install and tighten the four lter wing nuts,
washers, and isolators.
4. Reconnect the wire harness connector to the lter
shaker motor.
5. Close the hopper cover and secure the latch.
Filter Cleaning
The dust control lter is a polyester type element
lter. It may be vacuumed, blown out with
compressed air, tapped against the oor or
washed with soap and water.
1. If blown out with compressed air, use 100
psi (689 kPa) or less.
2. If washed with soap and water, use 40 psi
(275 kPa) water pressure or less.
NOTE: Make sure the lters are thoroughly
dried while standing on their side
before installing in the hopper.
Do not install or use a wet lter.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Armadillo 9X Sweeper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Armadillo 9X Sweeper in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info