627531
74
Zoom out
Zoom in
Previous page
1/96
Next page
© 2014-2015 Minuteman International, Inc.
Armadillo 9X Sweeper #4100033 Rev. D 07/15
Page 74
3. After adjustment, with the hopper down, use
the two adjustable stops located on the rotation
plates on both sides of the hopper to establish
3.5 in (8,9 cm) clearance between the rear
hopper entrance lip and the oor.
NOTE: The stop on the drivers side is located
immediately below the cylinder rod end
and is threaded into the cylinder mount
arm. The stop on the left side is located
directly above the arm rotation plate.
4. After the 3.5 in (8,9 cm) clearance is
established, make sure both stops make contact
simultaneously. The lower front edge of the
hopper should be 5 in - 6 in (12,7 cm - 15,2
cm) from the oor. A balanced adjustment of
both sets of adjustment bolts is required to
correctly adjust the hopper in the lower position.
If the bumper is lower than the frame, after the
hopper is correctly adjusted, loosen the bumper
attachment bolts and reposition the front bumper.
5. Raise the hopper and rotate fully.
6. Turn the engine off.
WARNING
Do not rely upon the hydraulic cylinders to
keep the hopper raised for maintenance.
Always engage the safety arm before
servicing the hopper.
PREVENTATIVE MAINTENANCE
ROTATION
CYLINDER
STOP
HOPPER
ROTATION
ARM
HOPPER
PIVOT
ROTATION
CYLINDER
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerBoss Armadillo 9X Sweeper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerBoss Armadillo 9X Sweeper in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info